CF Kits & Performance FIBERGLASS SPLITTERS/SIDE SKIRTS IN STOCK & READY TO SHIP!!!
#1
Former Vendor
Thread Starter
CF Kits & Performance FIBERGLASS SPLITTERS/SIDE SKIRTS IN STOCK & READY TO SHIP!!!
CF Kits & Performance
205 N Aspan Ave #4
Azusa, CA 91702
info@cfkits.com
626.629.6097
CALL US NOW TO PLACE YOUR ORDERS!
These fiberglass items are double laid 3oz fiberglass mat and laminated with high grade gel coats and resin. They are very light weight, durable and flexible.!! The base model front bumpers have to be drilled in order to install the splitters you can use lathe screws but they are not recommended. We provide 3/16 aluminum tri-fold rivets for maximum grip which also come with the side skirts (10x for the splitter, 20x for the skirts (10 on each side) and 8x 1/2" lathe screws for the mud guards.
The wide body front splitters are installed with the original bumper screws just take the oem splitter off and put our on. The side skirts are also mounted with 3/16 aluminum tri fold rivets. 20x for the skirts (10 on each side) and 8x 1/2" lathe screws for the mud guards. You do not have to use all 20 rivets for the skirts we just provide extras just in case.
The Zr1 style rear spoiler is about 1/2" taller than the OEM rear spoiler.! It is very easy to install just take off the factory and replace it with ours, it requires no drilling, but you do have the option. Spoiler sits right in its place with absolutely NO fitment issues. The underside of the spoiler is engraved with four long rectangle grooves two on each side over and under fitted for 1/2″ 3M double sided tape which is NOT included, and not recommended to use. We also provide you with two threaded holes on each side of the underside of the spoiler if you decide to drill, bolts and washers and instructions are all included.
Our fiberglass items come in matte black pre primer they are not painted and do require prep work before painting but it is very minimal, to someone that knows half of what their doing prep time is roughly 15-30 minutes.
Installation instruction will be with every item.! Made in U.S.A
The extended version of the zr1 side skirts which are 1" wider than the OEM fit only wide body models (GS/Zo6/Zr1).
We also carry the OEM size skirts.!! Just let us know when ordering.
www.cfkits.com
Enter promo code ShipFree to active FREE Shippin
ZR1 Style Front Splitters:
Fiberglass - $299.99 SHIPPED
ZR1 Style Side Skirts + Mud Guards:
Fiberglass - $324.99 SHIPPED
ZR1 Style Rear Spoiler (Fits All C6 Models):
Fiberglass - $349.99 SHIPPED Use coupon code: Zr1-FBRS to receive $25 discount.
ZR1 Style Front Splitter / Side Skirts + Mud Guards:
Fiberglass - $599.99 SHIPPED
ZR1 Style Front Splitter / Side Skirts + Mud Guards / Rear Spoier:
Fiberglass - $849.99 SHIPPED
OEM SIZE SKIRTS
205 N Aspan Ave #4
Azusa, CA 91702
info@cfkits.com
626.629.6097
CALL US NOW TO PLACE YOUR ORDERS!
These fiberglass items are double laid 3oz fiberglass mat and laminated with high grade gel coats and resin. They are very light weight, durable and flexible.!! The base model front bumpers have to be drilled in order to install the splitters you can use lathe screws but they are not recommended. We provide 3/16 aluminum tri-fold rivets for maximum grip which also come with the side skirts (10x for the splitter, 20x for the skirts (10 on each side) and 8x 1/2" lathe screws for the mud guards.
The wide body front splitters are installed with the original bumper screws just take the oem splitter off and put our on. The side skirts are also mounted with 3/16 aluminum tri fold rivets. 20x for the skirts (10 on each side) and 8x 1/2" lathe screws for the mud guards. You do not have to use all 20 rivets for the skirts we just provide extras just in case.
The Zr1 style rear spoiler is about 1/2" taller than the OEM rear spoiler.! It is very easy to install just take off the factory and replace it with ours, it requires no drilling, but you do have the option. Spoiler sits right in its place with absolutely NO fitment issues. The underside of the spoiler is engraved with four long rectangle grooves two on each side over and under fitted for 1/2″ 3M double sided tape which is NOT included, and not recommended to use. We also provide you with two threaded holes on each side of the underside of the spoiler if you decide to drill, bolts and washers and instructions are all included.
Our fiberglass items come in matte black pre primer they are not painted and do require prep work before painting but it is very minimal, to someone that knows half of what their doing prep time is roughly 15-30 minutes.
Installation instruction will be with every item.! Made in U.S.A
The extended version of the zr1 side skirts which are 1" wider than the OEM fit only wide body models (GS/Zo6/Zr1).
We also carry the OEM size skirts.!! Just let us know when ordering.
www.cfkits.com
Enter promo code ShipFree to active FREE Shippin
ZR1 Style Front Splitters:
Fiberglass - $299.99 SHIPPED
ZR1 Style Side Skirts + Mud Guards:
Fiberglass - $324.99 SHIPPED
ZR1 Style Rear Spoiler (Fits All C6 Models):
Fiberglass - $349.99 SHIPPED Use coupon code: Zr1-FBRS to receive $25 discount.
ZR1 Style Front Splitter / Side Skirts + Mud Guards:
Fiberglass - $599.99 SHIPPED
ZR1 Style Front Splitter / Side Skirts + Mud Guards / Rear Spoier:
Fiberglass - $849.99 SHIPPED
OEM SIZE SKIRTS
Last edited by CF Kits & Performance; 04-12-2016 at 04:01 AM.
#4
Race Director
Look sgood. Nice pricing. Too bad the front splitter isn't a tad wider, like, a 3" lip.
#7
Former Vendor
Thread Starter
Yes we are currently finishing a batch, but WONT post them up for sale until they are done, cured, and READY TO SHIP.
Thank you and as far as "Near perfect Fitment" I would not install these parts on my personal car if they did not fit right.
Having many years of hands on experience with fiberglass and carbon, we pretty much know there is no "perfect" fit to these parts due to the fiberglass being hand laid, and the resin shrinking as it cures.
How ever our parts are ALL DOUBLE Layered FIBERGLASS and made in the U.S.A with only quality parts/materials, are left in the molds to cure/shrink properly before being boxed and shipped.
In simpler terms they will have better durability and fitment compared to most of our competitors,that's just being modest.
#9
Former Vendor
Thread Starter
#12
Former Vendor
Thread Starter
Yes we do paint parts for an additional cost, and which parts were you thinking of getting painted? Depending on the quality of paint,clear, and color the prices will vary.
Proper cure of clear will take around 90 days, before it can be bubble wrapped and shipped out, although we can paint and ship out earlier at customers request.
Most definitely!
Front splitters cost around....................$149.99 to paint
Side Skirts W/Mud Flaps cost around.......$199.99 to paint
Rear Spoilers cost around......................$139.99 to paint
Proper cure of clear will take around 90 days, before it can be bubble wrapped and shipped out, although we can paint and ship out earlier at customers request.
Most definitely!
Front splitters cost around....................$149.99 to paint
Side Skirts W/Mud Flaps cost around.......$199.99 to paint
Rear Spoilers cost around......................$139.99 to paint
#13
Yes we do paint parts for an additional cost, and which parts were you thinking of getting painted? Depending on the quality of paint,clear, and color the prices will vary.
Proper cure of clear will take around 90 days, before it can be bubble wrapped and shipped out, although we can paint and ship out earlier at customers request.
Most Definitely!
Front splitters cost around....................$149.99 to paint
Side Skirts W/Mud Flaps cost around.......$199.99 to paint
Rear Spoilers cost around......................$139.99 to paint
Proper cure of clear will take around 90 days, before it can be bubble wrapped and shipped out, although we can paint and ship out earlier at customers request.
Most Definitely!
Front splitters cost around....................$149.99 to paint
Side Skirts W/Mud Flaps cost around.......$199.99 to paint
Rear Spoilers cost around......................$139.99 to paint
#14
Former Vendor
Thread Starter
All PM's replied to
Free paint/Install for ONE base model C6 corvette, first person to reply takes the deal!
Our shop is located conveniently at 205 N. Aspan ave, Azusa,CA,91702
Call/PM us now to make an appointment, or for more details.
(626) 629-6097
Free paint/Install for ONE base model C6 corvette, first person to reply takes the deal!
Our shop is located conveniently at 205 N. Aspan ave, Azusa,CA,91702
Call/PM us now to make an appointment, or for more details.
(626) 629-6097
#17
Former Vendor
Thread Starter
We can install for $100.00, our products all have great fitment and don't take more than a hr to get both sides installed.
All PM's replied too, and we will be posting some new pictures up soon!
#20
Former Vendor
Thread Starter