If you've ever taken your stock seat covers off you have noticed the seats side bolsters do not have any support under them. So as you climb in/out of the seat, the outside bolster foam tears where it contacts the steel seat frame and quickly sags or goes flat. The steel wires in the center area cut into the foam and quickly causes the foam to sag and pinching around the hip area.

This seat repair kit corrects the seat design defect where there is no support under the side bolsters and the center wires slice into the seat foam.

Included in the kit is the material for 1 seat:
· High density Upholstery foam
· Tough, wear resistant Ballistic nylon fabric to repair the cut foam.
· .25 inch jute pad to make the seat firmer
· Zip ties to replace the metal hog rings.
· Detail step-by-step instructions with

No special tools are required. Spray glue like 3M Super #77 or #90 to attach the pieces will be needed. This is widely available at any home improvement or crafts store.

Stop riding around with no support! Order your kit today







$42.95 shipped each
Order yours here <-------





Save $5 when you order 2! Select the second kit in the drop down option.

In stock for immediate shipping!

I just added an option to save when you order 2 kits. This has to be selected in the option drop down for the discount.




$42.95 shipped each
Order yours here <-------