[Z06] How much does the C6 Z06 engine cradle weigh?
#1
Drifting
Thread Starter
Member Since: Nov 2007
Location: Central Jersey, Union County N.J.
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '10
Does anyone know how much the C6 Z06 engine cradle weigh?
Does any know how much the C6 Z06 engine cradle weighs? or the C6 non Z06 engine cradle. Could you please tell me. I'm trying to compare. Thanks
Last edited by chazc6; 05-06-2009 at 11:58 AM.
#2
Drifting
Thread Starter
Member Since: Nov 2007
Location: Central Jersey, Union County N.J.
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '10
#3
Safety Car
This is from the FAQ section. This discussion is about a probable magnesium rear crossmember---but they refer to the weight savings of the magnesium front crossmember (12.1 lbs):
"That rear crossmember is likely to be worth nearly the same mass savings as the front (5.5 kg = 12.1 lbs). The front crossmember/engine cradle is the first production part from the USCAR team (fast-tracked)."
"That rear crossmember is likely to be worth nearly the same mass savings as the front (5.5 kg = 12.1 lbs). The front crossmember/engine cradle is the first production part from the USCAR team (fast-tracked)."
#6
Burning Brakes
Member Since: Aug 2008
Location: Coral Springs Florida
Posts: 837
Received 0 Likes
on
0 Posts
My front cross member was cast in a helium rich environment. so it actually floats..
Nice work with the 12.1 pounds, sure beats my GTO's 52 Pounder :-(
Nice work with the 12.1 pounds, sure beats my GTO's 52 Pounder :-(
#7
Drifting
Thread Starter
Member Since: Nov 2007
Location: Central Jersey, Union County N.J.
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '10
#9
Le Mans Master
I just looked it up, you are correct. Here is what I found.
"Compared to its aluminium predecessor, the 10.85-kilogram magnesium engine cradle provides mass savings of 30 to 35 percent."
That's roughly 24 lbs. so I guess the aluminum one was 36 lbs.
"Compared to its aluminium predecessor, the 10.85-kilogram magnesium engine cradle provides mass savings of 30 to 35 percent."
That's roughly 24 lbs. so I guess the aluminum one was 36 lbs.
Last edited by robvuk; 05-07-2009 at 06:26 PM.