[Z06] Need a Corvette Noselift System
#21
Safety Car
Member Since: Oct 2003
Location: Pearland, TX
Posts: 3,854
Likes: 0
Received 8 Likes
on
6 Posts
Cruise-In VIII Veteran
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20
There is one!!!! and it is really slick. They are in kits for coilover shocks only at this time. It is a hydraulic system with a dash switch to raise front end- in fact it can be installed on all four corners so it can raise whole car if wanted. I'll dig out contact info tonight and post. Really nice guy he sends kits all over world for all kinds of exotics. Very simple system. I visited his shop in League City Tx last Spring and saw install on a Ford GT. Owner/inventor is working on a system for stock leaf springs.
The following users liked this post:
JRLedFoot (12-03-2016)
#23
Race Director
Lambo has a hydraulic or electric lift system system that does this, some Ferraris do too
I saw a Lambo w 2 skateboard trucks & wheels bolted to frame under nose
I saw a Lambo w 2 skateboard trucks & wheels bolted to frame under nose
#26
For the price they want for the kit.... it would be cheaper to buy 4 extra sets of ZR1 splitters....
GT3 / GT3 RS
With KW Variant 3 Coilovers
Front Only HLS $8750
Front & Rear HLS $10200
For Stock Suspension
Front Only HLS $5375
Front & Rear HLS $6950
The ram lift pro is under 2k, but then I'm guessing in order to add it to coilovers you have to add a smaller coil over spring to account for the extra 2.5 inches of height the device adds when u put it in?
Sound like a good system, but would like to see whats involved to adding it to some Pfadt coilovers.
GT3 / GT3 RS
With KW Variant 3 Coilovers
Front Only HLS $8750
Front & Rear HLS $10200
For Stock Suspension
Front Only HLS $5375
Front & Rear HLS $6950
The ram lift pro is under 2k, but then I'm guessing in order to add it to coilovers you have to add a smaller coil over spring to account for the extra 2.5 inches of height the device adds when u put it in?
Sound like a good system, but would like to see whats involved to adding it to some Pfadt coilovers.
Last edited by blaine123; 08-22-2010 at 07:18 AM.
The following users liked this post:
JRLedFoot (12-03-2016)
#29
Burning Brakes
We currently build a variation of the GTM in house. We have air bags on one of our cars and I tell you, if you want some junk we'll sell you a used set. We have a custom built air ride technologies system on our car, and it's pure crap. Rides like crap, handles like crap....is crap.
#30
Le Mans Master
According to ex-chief engineer Dave Hill, the air dam is designed to ocassionaly scrape. I guess I've been lucky and have my front spoiler intact even though my car has been lowered and the bushings cut. Remembering to approach an inclined driveway on an angle is a must. I'm more afraid of hitting a small animal in the road.
#34
Former Vendor
We currently build a variation of the GTM in house. We have air bags on one of our cars and I tell you, if you want some junk we'll sell you a used set. We have a custom built air ride technologies system on our car, and it's pure crap. Rides like crap, handles like crap....is crap.
Rodney
#35
Heel & Toe
Chuck
#36
Instructor