[Z06] The Vette-Air CAM VIDEOS compilation; check it out!!!
#1
Former Vendor
Thread Starter
The Vette-Air CAM VIDEOS compilation; check it out!!!
Here is a little video list of our cams…
All Vette-Air cam kits include: new Ti retainers, keepers, viton seals and locks and new dual springs.
Link to all cams for purchasing:
http://www.theair-charger.com/camvasp.html
Street Bully: (a step over stock)
Cam kit: $735.95
http://www.youtube.com/watch?v=J3VDromnpBo
http://www.youtube.com/watch?v=Cugc2...eature=related
Black Mamba: (Mid level cam)
Cam kit: $765.95
http://www.youtube.com/watch?v=1v8HhvHkFvE
Black Widow: (Racy cam)
Cam kit: $765.95
http://www.youtube.com/watch?v=3jTKNx3zgFc
http://www.youtube.com/watch?v=O0me8EBOU6s
http://www.youtube.com/watch?v=L3QvP7AkZjc
Revised Black Widow (668rwhp) on E85 and high CR: (ONLY for the serious)
Cam kit: $765.95
http://www.youtube.com/watch?v=LqFePY5Bpt0
Macho cam on E85: (Racy cam with attitude)
Cam kit: $765.95
http://www.youtube.com/watch?v=Lo3j4V0mM4k
Black Mamba on E85:
http://www.youtube.com/watch?v=c6D5K..._order&list=UL
Black Mamba in action:
http://www.youtube.com/watch?v=8FrE9...eature=related
http://www.youtube.com/watch?v=Hmrdc...eature=related
http://www.youtube.com/watch?v=N6Qe1BcrshY
Lucifer cam: In action (Racy and only if you dare)
http://www.youtube.com/watch?v=BIwxkWpEcKo
Thanks,
Carlos
(214) 491-8314
All Vette-Air cam kits include: new Ti retainers, keepers, viton seals and locks and new dual springs.
Link to all cams for purchasing:
http://www.theair-charger.com/camvasp.html
Street Bully: (a step over stock)
Cam kit: $735.95
http://www.youtube.com/watch?v=J3VDromnpBo
http://www.youtube.com/watch?v=Cugc2...eature=related
Black Mamba: (Mid level cam)
Cam kit: $765.95
http://www.youtube.com/watch?v=1v8HhvHkFvE
Black Widow: (Racy cam)
Cam kit: $765.95
http://www.youtube.com/watch?v=3jTKNx3zgFc
http://www.youtube.com/watch?v=O0me8EBOU6s
http://www.youtube.com/watch?v=L3QvP7AkZjc
Revised Black Widow (668rwhp) on E85 and high CR: (ONLY for the serious)
Cam kit: $765.95
http://www.youtube.com/watch?v=LqFePY5Bpt0
Macho cam on E85: (Racy cam with attitude)
Cam kit: $765.95
http://www.youtube.com/watch?v=Lo3j4V0mM4k
Black Mamba on E85:
http://www.youtube.com/watch?v=c6D5K..._order&list=UL
Black Mamba in action:
http://www.youtube.com/watch?v=8FrE9...eature=related
http://www.youtube.com/watch?v=Hmrdc...eature=related
http://www.youtube.com/watch?v=N6Qe1BcrshY
Lucifer cam: In action (Racy and only if you dare)
http://www.youtube.com/watch?v=BIwxkWpEcKo
Thanks,
Carlos
(214) 491-8314
Last edited by Myhardtop; 02-11-2011 at 04:02 AM.
#3
Former Vendor
Thread Starter
#5
Former Vendor
Thread Starter
Yeah, I know...
I crashed on the couch after my neighbor and I went out and played with his 911 997 GT2 P-car. I rode shotgun and then we swap seats and before we knew, it was almost midnight. As we talked about cars (he also owns a modded C6Z), he asked about the differences in cam sounds and wondered if I ever made a sound compilation; I made this post after crashing on the couch from my outting earlier.
BTW, I don't need much sleep. I often street tune my cars or others late at night when all the goofballs are sleep and it is usually less cops on the road. Yep, just me and machine...and a laptop
Thanks,
Carlos
I crashed on the couch after my neighbor and I went out and played with his 911 997 GT2 P-car. I rode shotgun and then we swap seats and before we knew, it was almost midnight. As we talked about cars (he also owns a modded C6Z), he asked about the differences in cam sounds and wondered if I ever made a sound compilation; I made this post after crashing on the couch from my outting earlier.
BTW, I don't need much sleep. I often street tune my cars or others late at night when all the goofballs are sleep and it is usually less cops on the road. Yep, just me and machine...and a laptop
Thanks,
Carlos
#7
Former Vendor
Thread Starter
#8
Former Vendor
Thread Starter
Here is another Quality Motorsports Black Mambafied customer
Enjoy and don't forget to get your cam installed today...
The complete job tuned out the door is: $1,795
http://www.youtube.com/watch?v=SgdoDt3xXVE
Thanks,
Carlos
Enjoy and don't forget to get your cam installed today...
The complete job tuned out the door is: $1,795
http://www.youtube.com/watch?v=SgdoDt3xXVE
Thanks,
Carlos
#12
Hey Carlos, do you have a video of the Panther cam yet? That's the one that you've got me talked in to but I haven't got to hear it yet. Idling would be just fine but if you had one in cabin as it revs would be awesome.
#13
Former Vendor
Thread Starter
No videos of the Panther just yet, we finished them and off they go. I had it in my car for a while (as with every other cam I sell) and never ever made a video of it.
However, a couple of members had a chance to hear it in person prior and after Xmas. Shawn from Austin TX and Mr. 9sec383 from San Antonio; they may chime in. Or, come to the dyno day this Saturday and you may get a chance to hear one in person.
It sounds a lot like the Mamba cam. The Panther is between the mamba and the widow.
Thanks,
Carlos
#14
Instructor
Member Since: Mar 2008
Location: Houston Tx
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Wutz up Carlos.....Gentleman, I can tell you I have seen and heard the beast in person. I personally like it as aggressive as you can think of. This car idles without any issues and the temperatures are unbelievable. I am a big fan of high compression and E-85. This car pops and sounds nasty. If you ever get a chance to see it in person, you will be impressed. Carlos is very passionate about getting usable mods to corvette owners. He wants each and everyone to make as much power as it can, even if it is more than his.
Thanks,
Shawn
Thanks,
Shawn
#15
Former Vendor
Thread Starter
Wutz up Carlos.....Gentleman, I can tell you I have seen and heard the beast in person. I personally like it as aggressive as you can think of. This car idles without any issues and the temperatures are unbelievable. I am a big fan of high compression and E-85. This car pops and sounds nasty. If you ever get a chance to see it in person, you will be impressed. Carlos is very passionate about getting usable mods to corvette owners. He wants each and everyone to make as much power as it can, even if it is more than his.
Thanks,
Shawn
Thanks,
Shawn
We try our best to please and exceed expectations
Thanks,
Carlos
#16
Former Vendor
Thread Starter
Hello folks,
Don't forget to order your cam today
Remember, the Macho and Revised Widow cams are very aggressive and racy units.
The Black Mamba and Black Panther cams are more suited for guys who are looking for a little taste of those racy cams but with more higher DD civility.
Hope this helps
Thanks,
Carlos
Don't forget to order your cam today
Remember, the Macho and Revised Widow cams are very aggressive and racy units.
The Black Mamba and Black Panther cams are more suited for guys who are looking for a little taste of those racy cams but with more higher DD civility.
Hope this helps
Thanks,
Carlos
#17
Safety Car
Member Since: Oct 2008
Location: Ft. Collins, CO
Posts: 3,964
Likes: 0
Received 14 Likes
on
10 Posts
Hello folks,
Don't forget to order your cam today
Remember, the Macho and Revised Widow cams are very aggressive and racy units.
The Black Mamba and Black Panther cams are more suited for guys who are looking for a little taste of those racy cams but with more higher DD civility.
Hope this helps
Thanks,
Carlos
Don't forget to order your cam today
Remember, the Macho and Revised Widow cams are very aggressive and racy units.
The Black Mamba and Black Panther cams are more suited for guys who are looking for a little taste of those racy cams but with more higher DD civility.
Hope this helps
Thanks,
Carlos
#18
Former Vendor
Thread Starter
whats the difference between the widow cam I have and the revised one (idle, driveability, power gain?) I like the drive-ability of the widow cam I have now, drives like stock over ~1200 (sometimes it will act up in higher gears like 5th and 6th, so I try to keep it over ~1300-1400RPM in those gears) but over all very satisfied
Hello Walhan,
The difference is the valve event timing.
The revised Widow promotes higher cylinder pressure due to the new IVO/IVC/EVO/EVC process and thus slightly better TQ and slightly harder charge on top. Street manners of both cars remain the same while sound is also roughly the same.
Thanks,
Carlos
#19
Safety Car
Member Since: Oct 2008
Location: Ft. Collins, CO
Posts: 3,964
Likes: 0
Received 14 Likes
on
10 Posts
Hello Walhan,
The difference is the valve event timing.
The revised Widow promotes higher cylinder pressure due to the new IVO/IVC/EVO/EVC process and thus slightly better TQ and slightly harder charge on top. Street manners of both cars remain the same while sound is also roughly the same.
Thanks,
Carlos
The difference is the valve event timing.
The revised Widow promotes higher cylinder pressure due to the new IVO/IVC/EVO/EVC process and thus slightly better TQ and slightly harder charge on top. Street manners of both cars remain the same while sound is also roughly the same.
Thanks,
Carlos