[Z06] Forgeline Wheels
02-18-2011, 01:49 PM
#1
Former Vendor
Thread Starter
Member Since: Feb 2011
Location: Roswell New Mexico
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
Forgeline Wheels = American Performance at PTS
Hello Corvette Forum,
PTS is a dealer for Forgeline Wheels and our goal is to be the #1 Forgeline Dealer!
Take a look at the pictures below or visit www.forgeline.com for more photos and information.
Corvette Forum members will receive the best price & service on Forgeline.
For a price quote please send us a PM or call 1-855-353-7883.
Best Regards,
Perry Price
PTS,LLC
PTS is a dealer for Forgeline Wheels and our goal is to be the #1 Forgeline Dealer!
Take a look at the pictures below or visit www.forgeline.com for more photos and information.
Corvette Forum members will receive the best price & service on Forgeline.
For a price quote please send us a PM or call 1-855-353-7883.
Best Regards,
Perry Price
PTS,LLC
Last edited by P.T.S.; 03-17-2011 at 12:12 AM.
02-18-2011, 03:18 PM
#3
Former Vendor
Thread Starter
Member Since: Feb 2011
Location: Roswell New Mexico
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
They used to make the EVIR in 18" to fit the ZO6 but have since discontinued the 18x13.
Take a look at the GA3 and let me know if you have an interest in this style.
http://www.forgeline.com/products/pe...-18-19-20.html
Best Regards,
Perry Price
PTS.LLC
02-18-2011, 03:23 PM
#4
Melting Slicks
not into the GA3 style, really like the EV1R style and a one piece wheel is good enough for me.
Discontinued completely or just the 18x13" size??? I would like to keep stock sizing 18x9.5" F and 19x12" rear.
Discontinued completely or just the 18x13" size??? I would like to keep stock sizing 18x9.5" F and 19x12" rear.
02-18-2011, 03:26 PM
#5
Former Vendor
Thread Starter
Member Since: Feb 2011
Location: Roswell New Mexico
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
I wish I had a better answer.
Here are the sizes that are available.
Available in 18x9.0, 18x10.0, 18X10.5, 18x11, 18x11.5
Let me know and I will keep looking...
Here are the sizes that are available.
Available in 18x9.0, 18x10.0, 18X10.5, 18x11, 18x11.5
Let me know and I will keep looking...
02-18-2011, 03:33 PM
#6
Melting Slicks
I could probably go with a 18x10" wheel in the front ALA it fits a Z06 without issues just like OE (wheel offset, hub centre just like stock).
The rear really would have to be 12" wide. Since they make these wheels are they able to one off 2 19x12" wheels in that style??
The rear really would have to be 12" wide. Since they make these wheels are they able to one off 2 19x12" wheels in that style??
