Drilling is always recommended with this spoiler. Yes, you CAN install it with 3M tape, but we don't recommend that, we only state that as an option for guys who don't want to drill into their bumpers
If purchased, we send 6 OEM clips with the spoilers since there are 6 mounting points, same as the OEM piece, they slide into those openings. I'm sure you could get away with 4, but since there are 6 mounting points, we send 6
You'll just need 6 washers to bolt it on from the bottom
I know some guys like to turn their cars back to stock when they sell them, which is why the want to install this spoiler without drilling any holes, but with the price we sell these for I do recommend just leaving the spoiler on the car since you won't gain much by selling a used aftermarket spoiler
Gonzer, please email us over some pics or post them up here, that would be nice, thanks!
And for easy install, you do not need a template & I find those more confusing anyway. The GM template for the Ron Fellows spoiler is huge and covers the entire bumper so making copies of those is just a pain
Just lay the spoiler on the bumper where you want it to sit, grab a sharpie or your wife's favorite lipstick, mark off where the bottom of the bolts touch the bumper and there are your drill holes
Any other questions on anything, just let me know