[Z06] Z06 emblem removal?
#2
Burning Brakes
use dental floss And get between the emblem and the car. Then touch sticky tape to the leftover adhesive repeatedly until its gone. I find that method less abusive than spraying adhesive remover and rubbing. Don't forget where exactly they go on. And trying to put them back on is difficult because you have to cut tape to fit the shape. Good luck.
#3
Melting Slicks
Member Since: Nov 2009
Location: Klein TX
Posts: 3,036
Received 906 Likes
on
570 Posts
2023 C6 of the Year Finalist - Unmodified
2022 C6 of the Year Finalist - Unmodified
Here's one way: Cut thru the double sided tape with monofilament fishing line to remove the emblem, then remove any tape residue w/ 3M adhesive remover. 3M also sells an adhesive eraser tool. Just be careful not to scratch your paint.
Good luck
Good luck
#4
Melting Slicks
Member Since: Nov 2009
Location: Klein TX
Posts: 3,036
Received 906 Likes
on
570 Posts
2023 C6 of the Year Finalist - Unmodified
2022 C6 of the Year Finalist - Unmodified
use dental floss And get between the emblem and the car. Then touch sticky tape to the leftover adhesive repeatedly until its gone. I find that method less abusive than spraying adhesive remover and rubbing. Don't forget where exactly they go on. And trying to put them back on is difficult because you have to cut tape to fit the shape. Good luck.
#6
Le Mans Master
Absolutely correct. There are holes under the emblems for the European Corvettes and these are the emblems that are on the fenders.
The holes are for turn signals/running lights (i believe) for the European Corvettes.
The holes are for turn signals/running lights (i believe) for the European Corvettes.
#8
Drifting
Member Since: Jun 2002
Location: Las Vegas Nevada
Posts: 1,261
Likes: 0
Received 125 Likes
on
70 Posts
I removed mine - replaced the satin finished '08 emblems for chrome '09+ ones.
I used fishing line and 3M adhesive remover to remove residue.
The black outline are Sharpie marks I put on for alignment.
http://www.flickr.com/photos/101883541@N05/9769386301/
http://www.flickr.com/photos/101883541@N05/9769603166/
Jim
I used fishing line and 3M adhesive remover to remove residue.
The black outline are Sharpie marks I put on for alignment.
http://www.flickr.com/photos/101883541@N05/9769386301/
http://www.flickr.com/photos/101883541@N05/9769603166/
Jim
Last edited by Carnac; 09-16-2013 at 02:54 AM.