[Z06] Houston, TX valve repair
#1
Houston, TX valve repair
Are there any reputable dealerships or mechanics in or around Houston that are knowledgeable about the valve guide issue and willing or able to complete the necessary repairs.
#2
Race Director
If your car is still under warranty, go see Russell Casteel at Mack Haik Chevrolet on the Katy Fwy.
There have been a few threads by CF members who had their LS7 heads/valve work done there.
If you're out-of-warranty, go see Terry Wallace at VettTech in Katy.
FWIW, I use both of these shops as required.
G-L with your repairs.
There have been a few threads by CF members who had their LS7 heads/valve work done there.
If you're out-of-warranty, go see Terry Wallace at VettTech in Katy.
FWIW, I use both of these shops as required.
G-L with your repairs.
Last edited by Gary '09 C6; 01-22-2014 at 10:20 PM. Reason: add'l. info
#10
Not in Houston but Darin Morgan at Reher Morrison Racing Engines is in Arlington. Not a horrible drive to access a shop who's got an entire wall dedicated to just trophies they've earned from winning various racing championships.
#11
England Green did mine, was out of warranty and wanted to get the heads/intake all done up. No complains and dyno at 489rwhp, with a tune.
#14
Instructor
Member Since: Apr 2006
Location: Houston Tx
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Took my car to Mac Haik..Service writer was Duy, who goes by "G". The day after I dropped it off, heads were off car and getting ready to be shipped out for replacement. 2 days before power train warranty expired.