[Z06] Installed Burns Stainless NhB 450 exhaust on my H/C/I jsb Z
#1
Pro
Thread Starter
Installed Burns Stainless NhB 450 exhaust on my H/C/I jsb Z
Installed the Burns Stainless NhB 450 exhaust last night. First test drive will come this weekend. First impressions are this thing sounds incredible!!. Wayyyyy more subtle at idle than I would have guessed. Nasty when revved!! Very very easy to install. Ridiculously lightweight. I wanted something "different" than most. I see very few of these on c6z's. Now I'm asking myself WHY??!! Fit and finish is SUPERB and Vince over at Burns has been absolutely great to deal with.
My quad tips should arrive next week 😬
Mods:
AHP heads
btr stg 3
Formato ported FAST 102
nw 102
haltech mf 103
kooks 1 7/8 w/ catted mid pipe
Last edited by FRCEFED; 02-16-2017 at 08:15 PM.
The following users liked this post:
383 (02-17-2017)
The following users liked this post:
383 (02-17-2017)
The following users liked this post:
383 (02-17-2017)
#5
Melting Slicks
How is the drone on these?
#9
Supporting Vendor
Member Since: Nov 2005
Location: Supporting the Corvette Community at Abel Chevrolet in Rio Vista, CA 707-374-6317 Ext.123
Posts: 14,498
Received 1,425 Likes
on
597 Posts
St. Jude Donor '08
The following users liked this post:
MTPZ06 (02-18-2017)
#10
Pro
Thread Starter
Yeah, these are the smaller 4.5" mufflers. I can't wait to hear it WOT. It was exceptionally pleasing to me actually when I fired it up and heard it at idle. Very deep and mellow; and way more subtle than I'd anticipated. After hearing TONS of c6z exhausts I have to say that this far I'm extremely impressed with this setup. My last Z had an Akrapovic and even that sounds nowhere near as good as this at idle and while revving imo. Hell, I still think the OEM is one of the better sounding exhausts for our car. One reason I'm gonna just hold on to my zr1 axle back
#11
Those wheels look amazing. Anymore profile shots you can share?
#12
I called them last year and asked if theyd make a kit with the tailpipes together rather than spread but they said not at the moment(aka "no")
I am considering their 650 kit so I can make sound at the track.
How long are those mufflers? They look to be a good 16" long
Thanks for posting
I am considering their 650 kit so I can make sound at the track.
How long are those mufflers? They look to be a good 16" long
Thanks for posting
#13
Pro
Thread Starter
I called them last year and asked if theyd make a kit with the tailpipes together rather than spread but they said not at the moment(aka "no")
I am considering their 650 kit so I can make sound at the track.
How long are those mufflers? They look to be a good 16" long
Thanks for posting
I am considering their 650 kit so I can make sound at the track.
How long are those mufflers? They look to be a good 16" long
Thanks for posting
The following users liked this post:
383 (02-17-2017)
#14
Le Mans Master
Member Since: Dec 2005
Location: Port Arthur, Texas 77642
Posts: 8,475
Received 331 Likes
on
241 Posts
Nice setup and lightweight too, what do they weigh...~24 lbs?
I remember when they developed these for another member to install on his track car. Some tips will finish it off well.
I remember when they developed these for another member to install on his track car. Some tips will finish it off well.
#15
I have the 12" long/4.5" diameter Burns mufflers on my car and they are loud as f$@k and drone like crazy but I love them. The
Mufflers weigh 2.2 pounds each. For comparison the Corsa Sports weigh 25 lbs each.
Mufflers weigh 2.2 pounds each. For comparison the Corsa Sports weigh 25 lbs each.
#16
Team Owner
Yeah, these are the smaller 4.5" mufflers. I can't wait to hear it WOT. It was exceptionally pleasing to me actually when I fired it up and heard it at idle. Very deep and mellow; and way more subtle than I'd anticipated. After hearing TONS of c6z exhausts I have to say that this far I'm extremely impressed with this setup. My last Z had an Akrapovic and even that sounds nowhere near as good as this at idle and while revving imo. Hell, I still think the OEM is one of the better sounding exhausts for our car. One reason I'm gonna just hold on to my zr1 axle back
#17
I'm trying to decide on a system and I think I might need to go with the 6" one to be sure
#19
Race Director
It will be interesting to see if you have bad highway drone in 6th gear 60-75 MPH. At non-highway speeds it is easy enough to avoid drone by shifting into other gears but I wouldn't want to take a 100-1000 mile trip and have to drive in 5th on the highway.
#20
Drifting
Congrats on picking up an awesome exhaust system! Here is a link to the thread from when we were origionaly developing that system in 2014!
https://www.corvetteforum.com/forums...t-exhaust.html
https://www.corvetteforum.com/forums...t-exhaust.html