Procharger and JDP Motorsports ...props!
02-03-2016, 12:49 PM
#1
Safety Car
Thread Starter
Procharger and JDP Motorsports ...props!
2 great companies to deal with!
Ordered a procharger kit few days ago and its already on its way!
And its a custom c7 kit!
Great honest pricing at Jdp!
Ordered a procharger kit few days ago and its already on its way!
And its a custom c7 kit!
Great honest pricing at Jdp!
02-03-2016, 03:17 PM
#3
Former Vendor
All the best,
Jared Royce
801.545.4215
02-04-2016, 06:55 PM
#5
Former Vendor
All the best,
Jared Royce
801.545.4215
02-04-2016, 08:12 PM
#6
Safety Car
Thread Starter
Im one of the hardest to please and one of the most ****..and not afraid to speak my word!
I do my own work on my car and i think i do ok
Anyways kit came today very high quality kit i must say.
Detailed directions(unlike others i installed)
Wrapped everything in detailed pouches and so on
I did have an issue from shipping my lower valence was cracked so i immediatly sent emails out to JDP and procharger response was instant!...procharger immediatly sent one out and any questions or concerens were on it..WOW..
heres my pics i like to share
My build is a
2016 Z51 A8 with front mounted trans cooler..car has 90 miles
D1 procharger kit, bullet BOV and race inlet,vertical mount intercooler
Alky meth Kit
FSP breather tank
ARH Long tube headers with cats
Nitto nto5r Drag radials
Car will be drag raced at atco dragway in 2016 for some fun
I do my own work on my car and i think i do ok
Anyways kit came today very high quality kit i must say.
Detailed directions(unlike others i installed)
Wrapped everything in detailed pouches and so on
I did have an issue from shipping my lower valence was cracked so i immediatly sent emails out to JDP and procharger response was instant!...procharger immediatly sent one out and any questions or concerens were on it..WOW..
heres my pics i like to share
My build is a
2016 Z51 A8 with front mounted trans cooler..car has 90 miles
D1 procharger kit, bullet BOV and race inlet,vertical mount intercooler
Alky meth Kit
FSP breather tank
ARH Long tube headers with cats
Nitto nto5r Drag radials
Car will be drag raced at atco dragway in 2016 for some fun
Last edited by blown81bu; 02-04-2016 at 08:34 PM.
The following users liked this post:
blown81bu (02-04-2016)
02-06-2016, 12:06 PM
#8
Safety Car
Thread Starter
Procharger came through again sent me a new lower valence and a smaller pulley and belt to try...FREE
and saturday deivery
GO PROCHARGER!!!
:ye snod:
and saturday deivery
GO PROCHARGER!!!
:ye snod:
02-06-2016, 02:39 PM
#10
Safety Car
Thread Starter
02-06-2016, 07:23 PM
#11
Intermediate
Installed my C7 D1 Procharger kit last year at this time. Tyler Logan & the guys from Procharger helped answer a bunch of questions & fix a few glitches. Their support was always fast & professional. Love my setup!! Sure you will too!
The following users liked this post:
blown81bu (02-06-2016)
The following users liked this post:
blown81bu (02-08-2016)
02-09-2016, 08:53 PM
#13
Safety Car
Thread Starter
American racing headers bad ***!!
GOT TO THANK NICK FILIPPIDES OF AMERICAN RACING FOR HELPING ME GET THESE BAD *** HEADERS COMPLETE..
I used levels,micrometers,feeler gauges to set it perfectly in the car the whole system is perfectly fit front to back..Quality is superior and the customer service from Nick was unreal,called me helped me with every question i had..I used ARP header studs that make the install trick!
I used levels,micrometers,feeler gauges to set it perfectly in the car the whole system is perfectly fit front to back..Quality is superior and the customer service from Nick was unreal,called me helped me with every question i had..I used ARP header studs that make the install trick!
02-10-2016, 10:10 AM
#14
Pro
GOT TO THANK NICK FILIPPIDES OF AMERICAN RACING FOR HELPING ME GET THESE BAD *** HEADERS COMPLETE..
I used levels,micrometers,feeler gauges to set it perfectly in the car the whole system is perfectly fit front to back..Quality is superior and the customer service from Nick was unreal,called me helped me with every question i had..I used ARP header studs that make the install trick!
I used levels,micrometers,feeler gauges to set it perfectly in the car the whole system is perfectly fit front to back..Quality is superior and the customer service from Nick was unreal,called me helped me with every question i had..I used ARP header studs that make the install trick!
Seriously - all the best with your install and looking forward to seeing those numbers!
The following users liked this post:
blown81bu (02-10-2016)
02-10-2016, 02:12 PM
#15
Safety Car
Thread Starter
My helper does great work
02-10-2016, 07:32 PM
#16
Safety Car
Thread Starter
DIRECTIONS!!!!!!
ISNT THAT WONDERFULL IN COLOR AND DETAILED
ISNT THAT WONDERFULL IN COLOR AND DETAILED
Last edited by blown81bu; 02-10-2016 at 07:34 PM.
02-10-2016, 10:21 PM
#17
Safety Car
Thread Starter
Sound clip with headers
02-11-2016, 08:53 AM
#18
Safety Car
Thread Starter

To all my buddys here
I WILL POST pics and details during my procharger build how easy it is to install a procharger kit on a C7
Also tuning ,dyno and track results...stay tuned
To all my buddys here
I WILL POST pics and details during my procharger build how easy it is to install a procharger kit on a C7
Also tuning ,dyno and track results...stay tuned
02-11-2016, 12:34 PM
#19
living vicariously through these posts until my procharger arrives, card swiped last night 
then i'll be doing the install myself too by the end of february.
then i'll be doing the install myself too by the end of february.
02-11-2016, 12:57 PM
#20
Safety Car
Thread Starter