Boosted + FSP Catch Can come on in
If you're not going to run a catch can this would be the best method to keep the intake valves clean
02-20-2017, 04:58 PM
#22
02-20-2017, 07:15 PM
#23
Le Mans Master
Member Since: Nov 2003
Location: Tampa Fl
Posts: 7,972
Received 234 Likes
on
168 Posts
St. Jude Donor '12-'13-'14
[QUOTE=BrunoTheMellow;, FSP catch can (properly built, properly routed). .[/QUOTE]
That shop couldn't design a tick tac toe board. What they tried to do on many of their parts is copy other shops work and stick a FSP logo on it and failed.
That shop couldn't design a tick tac toe board. What they tried to do on many of their parts is copy other shops work and stick a FSP logo on it and failed.
02-20-2017, 09:06 PM
#24
Tech Contributor
Thread Starter
I realize that. That's why I was somewhat concerned. But a catch can is a catch can. Blow air through it, catch the oil. I also needed a breather for the oil smell in the cabin. The FSP can at the time was half the prime LMR was asking. It also routed the breather away from the cabin which is something that is now being done by others. My first unit was defective, second was perfect. Looks nice and stock too.
Last edited by BrunoTheMellow; 02-20-2017 at 09:10 PM.