New leak on jalopnik!
#21
☠☣☢ Semper Ebrius ☢☣☠
Looks almost exactly like the original Jalopnik rendering. The splitter is about the only difference.
It appears crow will, indeed, be eaten by some.
It appears crow will, indeed, be eaten by some.
#24
Le Mans Master
It doesn't to me. On this illustration the vents are lower, the lights are bigger and there is a more of a "curve" in the hood.
#25
Burning Brakes
#26
#30
Pro
Sonny
#31
Hmmm, this view hints that the hood vent may be on all of the models.
I wish they had an illustration of the air diverter up through the engine compartment and to the hood vent.
I wish they had an illustration of the air diverter up through the engine compartment and to the hood vent.
#32
A year and a half ago I talked to Tadge Juechter about the lack of a decent place to mount a front plate on a C6 and he mentioned they came up with a good sollution for the C7 that would both look good and still allow for the huge air intake opening they wanted for the race cars (they didn't want the split opening as the C5 has). I think what we are looking at in this drawing is a removable part mounted in the opening. So if you need it for a plate, leave it in, otherwise, take it out
Sonny
Sonny
#33
Safety Car
A year and a half ago I talked to Tadge Juechter about the lack of a decent place to mount a front plate on a C6 and he mentioned they came up with a good sollution for the C7 that would both look good and still allow for the huge air intake opening they wanted for the race cars (they didn't want the split opening as the C5 has). I think what we are looking at in this drawing is a removable part mounted in the opening. So if you need it for a plate, leave it in, otherwise, take it out
Sonny
Sonny
#35
Drifting
This drawing seems to show the crease that runs along the top of the fenders, along the inside edge of the headlights, and then to the leading edge of the nose. None of the renders got that as well as I thought they should according to the Omega leak.
Also, I like the nose having a bit of an "overbite" where the top of the nose is looks to hang out a bit over the bottom... ala C3.
-D
Also, I like the nose having a bit of an "overbite" where the top of the nose is looks to hang out a bit over the bottom... ala C3.
-D
#36
Team Owner
Lot of small differences from the "renderings" that gives it a much better appearance. Looks similar but isn't. BTW, that's an air dam/deflector(C6 ZR1 also had them) shown in the illustration that is bolted to the lower A-Arm, not a splitter that is bolted under the chin.
Last edited by JoesC5; 12-17-2012 at 05:12 PM.
#37
#38
Melting Slicks
Member Since: Jan 2010
Location: Cali for ya Republic
Posts: 2,041
Likes: 0
Received 0 Likes
on
0 Posts
#40
Melting Slicks