Official: Arctic White thread
#1022
#1024
2nd Gear
Member Since: Apr 2015
Location: San Antonio Texas
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2015 Stingray Z51 convertible 2LT w/ kalahari interior
Recently traded in my 2012 Machine Silver Z06 for this 2015 Arctic White Z51 convertible 2LT... outfitted with Kalahari top & interior, yellow calipers, 8 speed paddle shift auto, performance data recorder, Nav, competition sports seats, NPP exhaust & battery tender.
The only upgrade at this point was replacing the chrome lug nuts with black gorilla wheel locks and after market stingray valve stem caps. I'm on the fence about adding a Z06 front grill, stage II splitter and rockers.
This is my third vette purchase... and extremely happy with Chevy's redesign. Awesome... exterior, interior and underhood enhancements over my previous generation Corvettes... :O)
The only upgrade at this point was replacing the chrome lug nuts with black gorilla wheel locks and after market stingray valve stem caps. I'm on the fence about adding a Z06 front grill, stage II splitter and rockers.
This is my third vette purchase... and extremely happy with Chevy's redesign. Awesome... exterior, interior and underhood enhancements over my previous generation Corvettes... :O)
#1028
Le Mans Master
Recently traded in my 2012 Machine Silver Z06 for this 2015 Arctic White Z51 convertible 2LT... outfitted with Kalahari top & interior, yellow calipers, 8 speed paddle shift auto, performance data recorder, Nav, competition sports seats, NPP exhaust & battery tender.
The only upgrade at this point was replacing the chrome lug nuts with black gorilla wheel locks and after market stingray valve stem caps. I'm on the fence about adding a Z06 front grill, stage II splitter and rockers.
This is my third vette purchase... and extremely happy with Chevy's redesign. Awesome... exterior, interior and underhood enhancements over my previous generation Corvettes... :O)
The only upgrade at this point was replacing the chrome lug nuts with black gorilla wheel locks and after market stingray valve stem caps. I'm on the fence about adding a Z06 front grill, stage II splitter and rockers.
This is my third vette purchase... and extremely happy with Chevy's redesign. Awesome... exterior, interior and underhood enhancements over my previous generation Corvettes... :O)
#1029
Instructor
I had a chance to do a wash/clay/wax treatment. The improvement was quite noteworthy in person, but looking at the pictures now, the real shine is not captured in the pictures .. I will invest in a proper camera at some point
Note on clay - be careful around the rear lower rockers where there's a factory film. I accidentally rubbed clay there and now I have a yellow line where the film ends (cut off line). I have tried everything to remove it to no avail. Looks like some yellow clay got embedded between the protective film & the body.
Special thanks to Glen E. for his valuable advise.
Note on clay - be careful around the rear lower rockers where there's a factory film. I accidentally rubbed clay there and now I have a yellow line where the film ends (cut off line). I have tried everything to remove it to no avail. Looks like some yellow clay got embedded between the protective film & the body.
Special thanks to Glen E. for his valuable advise.
#1030
Pro
I had a chance to do a wash/clay/wax treatment. The improvement was quite noteworthy in person, but looking at the pictures now, the real shine is not captured in the pictures .. I will invest in a proper camera at some point
Note on clay - be careful around the rear lower rockers where there's a factory film. I accidentally rubbed clay there and now I have a yellow line where the film ends (cut off line). I have tried everything to remove it to no avail. Looks like some yellow clay got embedded between the protective film & the body.
Special thanks to Glen E. for his valuable advise.
Note on clay - be careful around the rear lower rockers where there's a factory film. I accidentally rubbed clay there and now I have a yellow line where the film ends (cut off line). I have tried everything to remove it to no avail. Looks like some yellow clay got embedded between the protective film & the body.
Special thanks to Glen E. for his valuable advise.
#1031
Instructor
I am not a detailing expert, but from what I have seen/read, clay is supposed to remove embedded dirt and contaminants from the paint. If you rub your finger gently on a freshly washed car and it feels "gritty", then claying may help.
I didn't have a very pleasant experience claying my other car (black paint). It looks like the clay may have picked up a small contaminant, and now I have scratch marks in the direction of the clay. It will come off with a polish I am sure, but it's something I wish I could have avoided. I used a fresh clay, used lots of clay lubricant, kneaded it, etc, but still ended up with scratches.
Next time I will skip claying the C7, and will use Meguiar's ultimate compound to get rid of any embedded dirt. It restored the paint on one of my other cars that had not been polished/waxed in many years.
I didn't have a very pleasant experience claying my other car (black paint). It looks like the clay may have picked up a small contaminant, and now I have scratch marks in the direction of the clay. It will come off with a polish I am sure, but it's something I wish I could have avoided. I used a fresh clay, used lots of clay lubricant, kneaded it, etc, but still ended up with scratches.
Next time I will skip claying the C7, and will use Meguiar's ultimate compound to get rid of any embedded dirt. It restored the paint on one of my other cars that had not been polished/waxed in many years.
Last edited by CdnC7; 04-14-2015 at 11:28 PM.
#1032
Instructor
Member Since: Dec 2014
Location: Ladera Ranch California
Posts: 123
Likes: 0
Received 3 Likes
on
2 Posts
New arrival
Well it's finally here! After a build date of 2/11, my new toy finally arrived at Callaway West on Friday! Here are a few pics that I will call the "before" pictures. After the Callaway SC is added along with Double D exhaust, Z06 grille, Z06 rear tails, window tint, clear bra and Weapon X splitter and rockers I will take and post the "after" pics. Should have this baby home in about 2 weeks!
Last edited by Spartan97; 04-15-2015 at 01:39 AM. Reason: Forgot some wording
#1033
What specs are the wheels? Size and offsets and tire sizes? (I know the brand)
#1035
Display
Excited to get her out of the garage....love her morning breath
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
First 1000 MILES Complete!
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
First 1000 MILES Complete!
#1037
Advanced
Just a Couple Pics from today...
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
2015 Corvette Stingray C7 Z51 3LT Arctic White | more pics: http://ward1.me/stingray2015
#1038
Team Owner
#1040
Team Owner