When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just ordered a 2016 that looks just like yours. Being a MD resident and my second corvette I like many of us have issues with the front license plate bracket. Your first pic I see your plate and bracket is high up over the front painted nose. The dealer said the car is given 2 mounts. Your second pic has the plate much lower on the front grille which looks so much better. Was that the case with your car? In other words were they both offered with the car? I will probably end up with a Top Flight mount like I had with my 07 and it shows lower like yours on the grille. Beautiful car you have enjoy!
The Aero Panel comes with all cars. The higher mounted bracket comes with cars that are registered in a state that requires two plates.
The Aero Panel helps with aerodynamics and isn't an "official" license plate bracket because it is below the height standard for plates.
That being said it works fine for mounting a license plate. You have to drill four holes but they are marked on the back. Looks much better centered in the grille.
A full month in the shop...check my posting ...a full write up there. I don't post much, with an exhausting schedule/work load so if you click on my name all is listed there under my posts...
Have added Stage 1 chin spoiler in Carbon Flash Black, Z06 taillights and Qtr panel air deflectors in Carbon Flash Black. Love the car! Drives awesome!
Last edited by VETTEKEDC7; 08-12-2016 at 11:25 PM.
Reason: Added Pics
05-05-2016, 10:02 PM
