EasyPower Radar Cords Now Available For Your C7!
#1
Former Vendor
Thread Starter
Member Since: Dec 2007
Location: Ft Worth TX
Posts: 22,135
Likes: 0
Received 2 Likes
on
2 Posts
St. Jude Donor '12-'13
EasyPower Radar Cords Now Available For Your C7!
If you're tired of the coiled power cable that came with your radar detector bouncing around when you drive....THEN YOU'RE NOT ALONE!
Our power cable plugs into the power supply of the rear view mirror and is tucked away out of sight when installed.No need to plug and unplug your radar detector anymore! The cable will automatically power your device on and off when you start and turn the car off. SIMPLE just like it was intended to be!
Our cable is designed to work with all Corvettes & Our new EasyPower Cord works with:
ESCORT-ALL MODELS
BELTRONICS-ALL MODELS
VALENTINE MODELS- ALL MODELS
If your current detector uses the phone plug type connector then this will work for you. The EasyPower cable is 8 inches in length which we have found to be just enough to mount the detector around the mirror without any extra cord hanging around to disrupt your view.
We also stock a 12 inch cable for an extra $4 per order. If you wish to order the longer cable, please specify by selecting above.
On Sale For $14.99! Click below to order:
http://www.corvettemods.com/Corvette...er_p_4982.html
Before:
After:
Our power cable plugs into the power supply of the rear view mirror and is tucked away out of sight when installed.No need to plug and unplug your radar detector anymore! The cable will automatically power your device on and off when you start and turn the car off. SIMPLE just like it was intended to be!
Our cable is designed to work with all Corvettes & Our new EasyPower Cord works with:
ESCORT-ALL MODELS
BELTRONICS-ALL MODELS
VALENTINE MODELS- ALL MODELS
If your current detector uses the phone plug type connector then this will work for you. The EasyPower cable is 8 inches in length which we have found to be just enough to mount the detector around the mirror without any extra cord hanging around to disrupt your view.
We also stock a 12 inch cable for an extra $4 per order. If you wish to order the longer cable, please specify by selecting above.
On Sale For $14.99! Click below to order:
http://www.corvettemods.com/Corvette...er_p_4982.html
Before:
After:
Last edited by corvettemods1; 02-23-2015 at 12:27 AM.
#4
Is there an installation manual? The description makes it sound very simple. I remember seeing a post here showing how to install quick connectors step-by-step. The OP did a great job and made it sound easy, but there were a lot of details like how to accomodate for the very snug quick connector connections. There was another post of a guy who had it done professionally and afterwards his side mirrors didn't dim any longer or they were always dimmed. Not sure which. Don't know what kit they used but it might have been this one. This seems like an ideal way of connecting a radar dectector if u don't end up breaking something. There was also a post stating GM said not to tap into the rear view mirror for power. I'd be really unhappy if I broke something.
#7
Racer
I believe I read somewhere that the back of the mirror on the convertible doesn't detach as on coupe and that this will not work on them...if I'm mistaken can someone clarify please.
#9
Melting Slicks
That is because the early attempts tried to use the dome light connection. The power out of the plug produces plenty of power and does NOT trip any fuses or relays.
#13
Instructor
Member Since: May 2011
Location: Cordova Tn
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts