Ben@WeaponX

Here is Lawrence's C7 on Forgeline GA3Rs!

Ben@WeaponX

Matt and the boys over at 21st Century Muscle Cars equipped Keith's C7 Corvette LT1 convertible with an 830HP engine package putting out 705HP to the wheels on Forgeline AR1 one piece forged monoblock wheels finished in Transparent Smoke.

Ben@WeaponX

Ron got some more pics to me on this one and I love it!

WEAPON-X
MESH7.C3s in 20x10.5 and 21x12.5 with Pirelli 305/375s
Carbon Fiber layered face, lip, etc

Ben@WeaponX

A few sets of WXM WIDEx5s in production

A carbon fiber layered set that has color matched lips and also a brushed center with gloss black lips that turned out really well!















Carbon Fibered up!




Brushed Center with Gloss Black

Ben@WeaponX

I'm a sucker for a good 7 spoke and 10 spoke. I'm working on the 10 spoke for another car I'm in the process of picking up. More to come!

Ben@WeaponX

Another busy week!

Stan's Crystal Red C7 Z51 is getting some fully polished set of Forgeline VX1s with a protective clear coat, which will look really hot with that paint!

Brushed face pictured since it doesn't appear one has been fully polished yet




David from Mighty Mouse Solutions just ordered a set of GA3Rs in black with diamond cuts (fancy ) on a 19/19 setup for his C7 Z06 with some MT drag radials out back. Makes me miss my silver seeing this

Ben@WeaponX

Don't hate me but on top of the Forgelines I've put in this week, you're #1 C7 wheel dealer just did a set of Forgelines for the very rare Viper ACR Extreme 750hp package

For the best pricing and service as always, just hit me up!

Ben@WeaponX

Gabe your VX1s shipped Thursday too 👍🏻. I'm looking forward to seeing that and your UGR Aventador and UGR Gallardo at your charity race next weekend!

The NCM Bash was a big hit with two more orders for my WXM Forged wheels as well.

As always you keep coming to the best, so thanks for making me your #1 C7 wheel dealer! I'm not the take what I can get type unless someone is offering better. You get my best price out of the gate with no carpet salesman pitch

Enjoy some more pics of Michael's Z!





Vrooooom vroom!





Here is the new GA3C we did for Josh's 600whp V wagon too which looks good! The finish is a smoked center with a Trans smoke lips.

Ben@WeaponX

Glenn Rupp's absolutely stunning C7 Corvette Stingray is equipped with Nowicki Autosport Design body enhancements, including their Concept 7 flares, front splitter, and rockers. It rolls on Michelin Pilot Super Sport tires and Forgeline one piece forged monoblock AR1 wheels finished in Tinted Gold Transparent.

Ben@WeaponX

Aside from continuing to bring you the best pricing and service on custom high end wheels like Forgeline, PUR, HRE, ADV1 etc, we're taking our WXM Forged brand to the next level as well. WEAPON-X is pleased to announce we've taken delivery of some of our machinery needed to start making our WXM wheels in-house opposed to the Florida based manufacturer used previously. All WXM Forged wheels will continue to be made from T6061 aluminum in the USA and will be SAE and TUV certified too with not only street wheel options but also less expensive light weight race options.









The next creation from WXM Forged is a thin 10 spoke, complete with I-beam technology, and raise spoke profile for maximum concavity!







As an Industrial Engineer, former GM and also GE Aircraft Engine Engineer, I'm very well versed in the manufacturing world... so it's fun to get back into it. And while I don't expect all the "other guys" to understand the technical aspects behind wheel structure, a lot of them are pedaling cast wheels often made in Taiwan, China, etc that are a knock off of high end wheel brands.

Case in point, PUR Wheels whom have sponsored my C7 with two different sets in the past are a Canadian company that has their wheels cut by the same high end wheel manufacturer that ADV1 used up until last year. These are the PUR LX10s:


vs.

The knock off "flow forged" MRR variant


Imitation is the finest form of flattery as they say... just make sure you know what you're buying

WXM

Ben@WeaponX

Jody's beautiful Shark Gray C7 Z51 with:

WXM Carbon Aero Kit
https://weaponx-c7.myshopify.com/products/c7-carbon-kit

CCB Z07 brake kit
https://weaponx-c7.myshopify.com/pro...ke-upgrade-f-r

WXM WIDEx5 wheels in a 20/21" with Pirelli 265/325s
https://weaponx-c7.myshopify.com/pro...rged-widex5-r2

PERFECTION!

Ben@WeaponX

Yet another set of the wildly popular WIDEx5s finished in a carbon fiber center with DSOM color matched lips and 50/50 exposed color matched hardware!
https://weaponx-c7.myshopify.com/pro...ex5-c3-3-piece

I can't wait to see these on Jason's Z. He already has a Halltech intake
https://weaponx-c7.myshopify.com/pro...intake-stinger

and Akrapovic exhaust from WEAPON-X as well
https://weaponx-c7.myshopify.com/pro...6-ordering-now

Ben@WeaponX

GA1Rs in carbon flash in 18x11 and 18x13 with Hoosier R7s for Mike's C7 Z06 Z07!



Seat harnesses are a nice touch as he headed out to the auto cross

Ben@WeaponX

Another Akrapovic out yesterday too!

Ben@WeaponX

I'm about satisfied with this one. It has some gorgeous features including floating spokes, stepped lip, titanium hardware, hub pocketing etc for weight reduction.

Ben@WeaponX

Two more VX1 setups sold this week, both black chrome!

A 6 wheel setup going to Marty H for street and 18" rears for drag racing with MTs

20x10 and 20x11 setup sold for a supercharged 2016 Camaro SS in black chrome to Nick S as well. This car is a beauty too, makes me excited for my ZL1 order

Ben@WeaponX

Scheduled to ship next week!

David Childress - Forgeline GA3Rs
Nathan Wooley - VX1s
Matt Marletto - VX1s

Ben@WeaponX

Mike Daniels your GA1Rs are shipping today!

Ben@WeaponX

Brian's 1400whp FSP Z51 with WEAPON-X widebody and yet another set of Forgelines from us. These are the GA1R with Toyo R888s shipped complete.

Ben@WeaponX

Pics of Mike's WXM sponsored C7 Z06 on Forgeline GA1Rs!