Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: General How-Tos
- Corvette: How to Add Carbon Fiber to Your Dash
Step by step instructions for do-it-yourselfers..
Browse all: General How-Tos
I am adding carbon fibre to my interior FAY was on constraint when I bought my car.
#1
AIR FORCE VETERAN
Thread Starter
I am adding carbon fibre to my interior FAY was on constraint when I bought my car.
There are some very good manufactures of Carbon Fibre parts for the new Stingray. I know I can find all the parts I am looking for but my question has to do with the finish.
The factory Carbon Fibre is a matte finish. A high quality finish that is subtle and classy. The aftermarket can do that just as well. They also make the same parts in a high gloss which is really impressive. There is my problem. My interior is Brownstone which is very plush. Brownstone does not say " race me". It is more like " take me to a good restaurant".
So should I go with the matte finish? Does it enhance my interior?
Or
Do I go with the high polish Carbon Fibre which is really glossy buy obviously hard core? Very cool.
I have a briefcase which is made with a high gloss carbon fibre. People I know think it is very unusual and sharp.
I would appreciate your input.
Bill
The factory Carbon Fibre is a matte finish. A high quality finish that is subtle and classy. The aftermarket can do that just as well. They also make the same parts in a high gloss which is really impressive. There is my problem. My interior is Brownstone which is very plush. Brownstone does not say " race me". It is more like " take me to a good restaurant".
So should I go with the matte finish? Does it enhance my interior?
Or
Do I go with the high polish Carbon Fibre which is really glossy buy obviously hard core? Very cool.
I have a briefcase which is made with a high gloss carbon fibre. People I know think it is very unusual and sharp.
I would appreciate your input.
Bill
#2
Moderator
I have the factory CF dash in my Brownstone interior. To me, it looks very good and definitely enhances the interior. Even non-car people who see the interior notice it right away. I really don't think I would want the glare from a gloss finish.
#3
Racer
I looked at the FAY on the dealers lot when I was placing my order and I went with it because it was matte, gloss would be to much for me. I am so glad I got to look at the exposed carbon roof as well because on the Cyber Gray it looked brown in the sun. I skipped that option but it did look good on the White and Red on their lot.
Eric
Eric
#4
Team Owner
Member Since: Jun 2005
Location: Northern, VA
Posts: 46,104
Received 2,481 Likes
on
1,944 Posts
St. Jude Donor '15
"In honor of jpee"
My personal opinion (and preference) would be something not being made -- but it could be. The high gloss look would not, imo, be as good for your car's "look" compared to the "stock" matte finish. However, the best look, again imo, is to be somewhere in between the two---not high gloss, and not matte finish. Good luck finding, or asking for that carbon fiber finish. It is able to be done, but so far, I hear/read of no one doing it.
#7
There are some very good manufactures of Carbon Fibre parts for the new Stingray. I know I can find all the parts I am looking for but my question has to do with the finish.
The factory Carbon Fibre is a matte finish. A high quality finish that is subtle and classy. The aftermarket can do that just as well. They also make the same parts in a high gloss which is really impressive. There is my problem. My interior is Brownstone which is very plush. Brownstone does not say " race me". It is more like " take me to a good restaurant".
So should I go with the matte finish? Does it enhance my interior?
Or
Do I go with the high polish Carbon Fibre which is really glossy buy obviously hard core? Very cool.
I have a briefcase which is made with a high gloss carbon fibre. People I know think it is very unusual and sharp.
I would appreciate your input.
Bill
The factory Carbon Fibre is a matte finish. A high quality finish that is subtle and classy. The aftermarket can do that just as well. They also make the same parts in a high gloss which is really impressive. There is my problem. My interior is Brownstone which is very plush. Brownstone does not say " race me". It is more like " take me to a good restaurant".
So should I go with the matte finish? Does it enhance my interior?
Or
Do I go with the high polish Carbon Fibre which is really glossy buy obviously hard core? Very cool.
I have a briefcase which is made with a high gloss carbon fibre. People I know think it is very unusual and sharp.
I would appreciate your input.
Bill
#8
Safety Car
#9
Pro
Member Since: May 2005
Location: Up North Wisconsin
Posts: 697
Likes: 0
Received 50 Likes
on
13 Posts
I have the FAY dash and while it is a huge improvement over the plain one I find it is a bit lackluster. A gloss finish would really pop especially with the same treatment on the console. With that high gloss comes dust, fingerprints and scratches that are more noticeable. Gotta love those Apsis parts.
#10
AIR FORCE VETERAN
Thread Starter
Boy am I confused now...LOL
I took the car out for a ride today. I tried to imagine both finishes. I think, and of corse I could be wrong, that the gloss would be to loud in the subdued zBrownstone...
Z513LT. Is the one you are speaking about high gloss or middle gloss?
I took the car out for a ride today. I tried to imagine both finishes. I think, and of corse I could be wrong, that the gloss would be to loud in the subdued zBrownstone...
Z513LT. Is the one you are speaking about high gloss or middle gloss?
#11
I'll take some shots and post them next week. I paid $600 for the GM dash and another $250 for the clear coat and buffing. I'll be selling it for just what I paid for the dash if anyone is interested.
#12
My car is the Kalahari and that dash isn't out of place at all. I think it would look stunning with Brownstone. It would add to the richness of an already sumptuous looking interior.
#14
Le Mans Master
This is what I want ! Can you elaborate on the polishing process ? Or can I just buy it already polished ?
#16
Le Mans Master
#18
Team Owner
Member Since: Jun 2005
Location: Northern, VA
Posts: 46,104
Received 2,481 Likes
on
1,944 Posts
St. Jude Donor '15
"In honor of jpee"
"...in the gloss camp but not to the extent of the Apsis in the pics earlier in this thread... ." Sounds familiar for some reason.
#20
Le Mans Master
Member Since: Apr 2005
Location: West Burbs of Chicago IL
Posts: 6,700
Received 3,986 Likes
on
1,675 Posts
Definitely matte finish. Something about the high gloss that looks like looks low rent to me.