C7 Corvette Stingray Zero7 Side Rocker Panel Skirts Package on sale...
07-11-2014, 12:02 PM
#1
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
C7 Corvette Stingray Zero7 Side Rocker Panel Skirts Package on sale...
C7 Corvette Stingray Side Rockers - Zero7 Style
ALL NEW! Stingray Side Rockers for Chevrolet Stingray Corvette C7
Despite already producing our Zero1 Rockers, after being inspired by the forthcoming Z06 / Z07 model Corvette unveiled in January, we let our temptation run wild and free. We think you’ll agree that what we have created is yet more evidence for our commitment to style, synergy and evolution.
Introducing the C7 Zero7 Side Rockers
As always the Zero7 Side Rockers come fully prepped and primed, as well as smoothly moulded using our RTM composite process that makes rough edges a thing of the past. Our customers loved our Zero1 Side Rockers and requested something similar, but different. We were more than happy to oblige. Our dedication to smooth lines and sumptuous contouring has never been more evident making it hard to believe that the Stingray did not always possess these Side Rockers; such is the perfection of the marriage between component and vehicle.
The installation process takes only 30 minutes per side, using the mechanical fastener kit supplied and avoiding the use of messy adhesives or double-sided tape.
Our Stingray Side Rockers carry the following features as standard:
*Manufactured in an OEM-validated RTM composite material
*Enhances your car’s aerodynamics at high speeds
*Will not lower the ride height of the vehicle
*Smooth finish to both sides that looks and feels good, and facilitates easy cleaning
*Mounted to the original OEM rocker panel
*Installation kit including (Passenger/ Driver Side Rocker Panels, 18 Scrivets, 16 U-nuts & Bolts, Easy Instructions).
Compatible with several other splitters on the market
Select finish when ordering:
*Primed Finish
*Satin Black Finish
Available here: http://www.southerncarparts.com/corv...ts-p-6325.html
ALL NEW! Stingray Side Rockers for Chevrolet Stingray Corvette C7
Despite already producing our Zero1 Rockers, after being inspired by the forthcoming Z06 / Z07 model Corvette unveiled in January, we let our temptation run wild and free. We think you’ll agree that what we have created is yet more evidence for our commitment to style, synergy and evolution.
Introducing the C7 Zero7 Side Rockers
As always the Zero7 Side Rockers come fully prepped and primed, as well as smoothly moulded using our RTM composite process that makes rough edges a thing of the past. Our customers loved our Zero1 Side Rockers and requested something similar, but different. We were more than happy to oblige. Our dedication to smooth lines and sumptuous contouring has never been more evident making it hard to believe that the Stingray did not always possess these Side Rockers; such is the perfection of the marriage between component and vehicle.
The installation process takes only 30 minutes per side, using the mechanical fastener kit supplied and avoiding the use of messy adhesives or double-sided tape.
Our Stingray Side Rockers carry the following features as standard:
*Manufactured in an OEM-validated RTM composite material
*Enhances your car’s aerodynamics at high speeds
*Will not lower the ride height of the vehicle
*Smooth finish to both sides that looks and feels good, and facilitates easy cleaning
*Mounted to the original OEM rocker panel
*Installation kit including (Passenger/ Driver Side Rocker Panels, 18 Scrivets, 16 U-nuts & Bolts, Easy Instructions).
Compatible with several other splitters on the market
Select finish when ordering:
*Primed Finish
*Satin Black Finish
Available here: http://www.southerncarparts.com/corv...ts-p-6325.html
__________________
Last edited by southerncarparts; 02-04-2015 at 10:32 AM.
10-14-2014, 05:13 PM
#6
Le Mans Master
PM sent.
11-15-2014, 10:59 AM
#13
Le Mans Master
My T.R is supposed to be by the end of the month.
Do the openings on the inside front and rear, clear the jacking pucks? Back one looks a little small in the pic.
If painted C.F. can you do the outside edge full length in Torch Red
Thanks
John
Do the openings on the inside front and rear, clear the jacking pucks? Back one looks a little small in the pic.
If painted C.F. can you do the outside edge full length in Torch Red
Thanks
John
11-15-2014, 02:20 PM
#16
SUPPORT AUTISM
I have the jacking pucks that stay in place. Today I test fitted the skirts and drilled the holes and took them back down to take to the paint shop. The skirts fit fine around the pucks.
11-15-2014, 06:53 PM
#18
Melting Slicks
