$$$frumnuttin'

Guys with front splitters and lowered on stock bolts.....can you measure your clearance up front and post the numbers here? Just one reading in the center is fine. A comparison of the different brands/styles would benefit the forum...thanks!

SSTG

Good idea.

WKMCD

A measurement where the splitter terminates at the wheel opening would also be good to have.

Thepiazza

5 inches

WKMCD

Who makes that one?

Glen e

That is lashway's....

C7Joy

That looks like it would work for me. 5" is enough clearance. Thanks for the measurement.

Thepiazza

This is exactly where my measurements are taken from.

$$$frumnuttin'

Great start.....5 inches seems more than enough.....(that's what she said!)....

Glen e

All these splitters jut out front instead of hanging down, the pic above is perfect to show this....

DocHolliday

I'm at 5" with the ACS splitter lowered on stock bolts as well.

george vee

I like to know also.

Theta

^ ^

Steve Snake Driver

Me too.

0ACS Composite

Here is a video of our ACS Splitter going up a steep hill and driveway with ditch.

dovervold

Z51, Magnetic Ride, lowered all the way on stock bolts. View from the side, and the second pic is in the center. Now it makes me wish I had after market bolts and drop another inch:

$$$frumnuttin'

[QUOTE=dovervold;1587348549]Z51, Magnetic Ride, lowered all the way on stock bolts. View from the side, and the second pic is in the center. Now it makes me wish I had after market bolts and drop another inch:



excellent!

bbrown450

Do not have an exact measurement but suffice ti say it is the lashway-lowered on factory bolts.... oh and shine is by "The Glen E technique"

Theta

Do you have the 'curved-lip-bump' driveway entrance? It looks like you do, and that's exactly my problem here. Always afraid of ripping something off before even adding a splitter or lowering.

Car looks great, by the way.

MrGTC

Great video. I'll definitely be ordering from you once I get my '15 in a few months.