Cray wheels
#1
Advanced
Thread Starter
Cray wheels
I have a set of cray,chrome wheels that don't clear the calapers and have to have spacers on the rear so they will fit but the wheels won't balance right and can feel it in my seat.
Is there anyone else out there who has the same problem.sure would like to here from you.
my vette is a 14 and a non z51,and is an auto...
Thanks
Is there anyone else out there who has the same problem.sure would like to here from you.
my vette is a 14 and a non z51,and is an auto...
Thanks
#2
Race Director
Member Since: Sep 2013
Location: Ft Lauderdale
Posts: 10,439
Received 933 Likes
on
488 Posts
Tech Contributor
My cray wheels balance perfectly and brickyards clear calipers no problem...try another size without spacers...also a non z51 auto....
19 x 9 cray - 1990CRB505121F70 machine face 50 offset
20 x 10.5 - 2005CRB655121F70 - machine face 65 offset
19 x 9 cray - 1990CRB505121F70 machine face 50 offset
20 x 10.5 - 2005CRB655121F70 - machine face 65 offset
Last edited by Glen e; 08-30-2014 at 10:04 PM.
#3
Instructor
I have a set of cray,chrome wheels that don't clear the calapers and have to have spacers on the rear so they will fit but the wheels won't balance right and can feel it in my seat.
Is there anyone else out there who has the same problem.sure would like to here from you.
my vette is a 14 and a non z51,and is an auto...
Thanks
Is there anyone else out there who has the same problem.sure would like to here from you.
my vette is a 14 and a non z51,and is an auto...
Thanks
Been discussing these with a few forum dealers.
What sizes?
I've been assured 19 & 20 will work with non Z51. Would love a real world response.
#4
Drifting
Figure anything out yet? I know they make these for the C6 and the C7. Any chance they sent you a set for the base C6 by mistake? Offsets and widths would be the same, but caliper clearance would differ.
#5
Cray
Brickyards fit like a glove on my C7
#6
Advanced
Thread Starter
cray wheels
yes they are.hawk chrome.the size are 18x9 and 19x10.5.i agreecray could have sent the wrong wheels.will contact my supplier tomorrow.thanks for all the input.will let all know what i find out....
#7
Instructor
I have been considering these.
~BC