See how CPR does nitrous on a C7!
#1
Supporting Vendor
Thread Starter
See how CPR does nitrous on a C7!
So we have a C7 here we finished up and while I can't post dyno video's just yet per the owner's request (mon I can) I will say the car made 990 rwhp 925 rwtq on a 100% stock bottom end. Car has the following mods
Procharger kit w/ D1 w/ 3.55 pulley (12psi is what we saw)
CPR 2'' longtube headers
CPR custom cam (big lol)
Alky control meth kit w/ dual nozzle
Nitrous outlet plate system jetted for a 200 shot w/ a standalone fuel cell
100% stock bottom end, clutch, etc, etc.
On blower only the car made 720/655 rwhp/rwtq.
We did something really trick w/ the nitrous switch's and figured I would post up a video to show you until mon when we can throw up the dyno video.
Procharger kit w/ D1 w/ 3.55 pulley (12psi is what we saw)
CPR 2'' longtube headers
CPR custom cam (big lol)
Alky control meth kit w/ dual nozzle
Nitrous outlet plate system jetted for a 200 shot w/ a standalone fuel cell
100% stock bottom end, clutch, etc, etc.
On blower only the car made 720/655 rwhp/rwtq.
We did something really trick w/ the nitrous switch's and figured I would post up a video to show you until mon when we can throw up the dyno video.
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
#2
why...because you can neat thinking
#3
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
ttt
Very nice some great numbers. But would tell the owner to get a set of aftermarket axle's for the car. It will break both if not the smaller one in these cars for sure... But very nice numbers on the car.
The following users liked this post:
SteveDoten@ARH (12-28-2015)