**New XO Verona Conave Wheels For C7 19x9.5/20x11" On Sale**
#1
Supporting Vendor - Supporting Member
Thread Starter
**New XO Verona Conave Wheels For C7 19x9.5/20x11" On Sale**
**INTRODUCING XO VERONA CONCAVE WHEELS FOR C7**
SIZES AVAILABLE:
19X9.5 +56mm
20X11 +73mm
PLEASE PM, EMAIL, OR CALL FOR ALL PRICING.
FITS:
2014-2015 STINGRAY/Z51 CORVETTE
SATIN MATTE BLACK
BRUSHED MATTE SILVER
VIEW MORE OF OUR CUSTOM AND FACTORY GM WHEELS BELOW.
http://www.1stratecorvetteparts.com/
EMAIL: Docz-1stratecorvette@hotmail.com
Last edited by DOCZ- 1st Rate Corvette Parts & Acc.; 01-19-2015 at 02:10 PM.
#2
Supporting Vendor - Supporting Member
Thread Starter
Last edited by DOCZ- 1st Rate Corvette Parts & Acc.; 04-01-2019 at 11:05 AM.
#3
Supporting Vendor - Supporting Member
Thread Starter
Last edited by DOCZ- 1st Rate Corvette Parts & Acc.; 02-16-2018 at 08:40 PM.
#4
Finally... A reasonably priced, great looking wheel. Can't wait to see these on a stingray! This size and offset will sit right on a stock z51?
#5
Supporting Vendor - Supporting Member
Thread Starter
Last edited by DOCZ- 1st Rate Corvette Parts & Acc.; 01-18-2015 at 06:26 PM.
#6
Supporting Vendor - Supporting Member
Thread Starter
We also have the 19x10-20x12" sizes for the Z06/GS/427. We will be mounting a set on our C6-Z06 later this week for pictures!
#8
Supporting Vendor - Supporting Member
Thread Starter
Side by side comparison. OEM GM silver Z51 20x10 next to the X0 Verona 20x11!
Last edited by DOCZ- 1st Rate Corvette Parts & Acc.; 05-04-2015 at 10:27 PM.
#9
Supporting Vendor - Supporting Member
Thread Starter
Last edited by DOCZ- 1st Rate Corvette Parts & Acc.; 01-28-2015 at 03:35 PM.
#10
Supporting Vendor - Supporting Member
Thread Starter
We have had a few members ask if the OEM caps will fit. We tested out a grey OEM C7 cap and it will fit however its not snug. You will have to modify with an Oring gasket or similar to what some C7 guys have done with the TSWs. We also have some plain caps with no logo available.
Last edited by DOCZ- 1st Rate Corvette Parts & Acc.; 01-16-2015 at 09:05 PM.
#11
Supporting Vendor - Supporting Member
Thread Starter
#13
this wheel is begging for a machine face version...imo
#15
Supporting Vendor - Supporting Member
Thread Starter
#16
Supporting Vendor - Supporting Member
Thread Starter
#17
Supporting Vendor - Supporting Member
Thread Starter
Sorry 19x11 is not available. If your looking for super lightweight go with the TSW 19x10.5 as we are a TSW dealer as well. I have not had a chance to weigh these. They will be heavier than the OEM 20x10 OEMS due to the larger width and lower offset. They are not a rotary forged wheel like the Forgestars and Tsws.