View Poll Results: Which fitment and finish would you choose?
18/19 Brush Titanium
26
27.66%
18/19 Brush Silver
7
7.45%
19/20 Brush Titanium
44
46.81%
19/20 Brush Silver
17
18.09%
Voters: 94. You may not vote on this poll
Lightweight Rotary Forged Stance SF01 Wheels 18/19 & 19/20 Brush Silver & Titanium
05-13-2015, 06:20 PM
#21
Supporting Vendor
Thread Starter
The 19/20 Brush Titanium, and 19/20 Brush Face Silver fitments have been confirmed!
The ETA on the wheels is 4 months.
The offsets have not been released yet.
The 18/19 application is under consideration and will likely be produced soon after the 19/20 setups.
-Mike
The ETA on the wheels is 4 months.
The offsets have not been released yet.
The 18/19 application is under consideration and will likely be produced soon after the 19/20 setups.
-Mike
05-14-2015, 12:23 AM
#22
The 19/20 Brush Titanium, and 19/20 Brush Face Silver fitments have been confirmed!
The ETA on the wheels is 4 months.
The offsets have not been released yet.
The 18/19 application is under consideration and will likely be produced soon after the 19/20 setups.
-Mike
The ETA on the wheels is 4 months.
The offsets have not been released yet.
The 18/19 application is under consideration and will likely be produced soon after the 19/20 setups.
-Mike
05-14-2015, 07:52 AM
#23
Can we get more wheel options besides these for the C7?
I have always liked Stance's wheels and prices (not bad for a company that started with coilovers) but I just need more options than this. Are there any others that are on the horizon in C7 fitment?
I have always liked Stance's wheels and prices (not bad for a company that started with coilovers) but I just need more options than this. Are there any others that are on the horizon in C7 fitment?
05-14-2015, 08:37 AM
#24
Race Director
Very interested in the 19/20 brushed titanium depending on whether they stick out or not. Not into the "aggressive" fit as described by other vendors.
05-14-2015, 01:01 PM
#25
Supporting Vendor
Thread Starter
-Mike
-Mike
-Mike
__________________
Email: osvic@n4sm.com | Phone: 818-547-5474 Cell: 323-440-3532
438 W Cypress St. Glendale, CA 91204 Website: www.n4sm.com www.Project6GR.com
Email: osvic@n4sm.com | Phone: 818-547-5474 Cell: 323-440-3532
438 W Cypress St. Glendale, CA 91204 Website: www.n4sm.com www.Project6GR.com
05-14-2015, 03:30 PM
#26
Drifting
I saw a set of the same wheel design on an Audi in FL this winter. Really caught my eye. Very interested! Weight is comparable to other roto forged wheels in same sizes.
05-14-2015, 03:49 PM
#27
Supporting Vendor
Thread Starter
We will beginning accepting pre-orders in approximately 2 months.
-Mike
06-11-2015, 06:23 PM
#38
Burning Brakes
It would be fantastic if these were available in 18/19.
Most of the folks that bought the Z51 want to keep their rims and they aren't looking to purchase.
The main people that want to upgrade are those of us with the base package. It's preferred not to have to replace both the wheels and the tires, so we'd like to stick with 18/19.
Most of the folks that bought the Z51 want to keep their rims and they aren't looking to purchase.
The main people that want to upgrade are those of us with the base package. It's preferred not to have to replace both the wheels and the tires, so we'd like to stick with 18/19.
06-11-2015, 06:35 PM
#39
Racer
I am looking for new wheels now and the Stance SF01 are just what I was hoping to find... BTW what sort of warranty comes with the wheels.
06-11-2015, 06:49 PM
#40
Burning Brakes
the Stance SC-9 SILVER MACHINED in 18/19 would also be great!!