Rear spoiler
#2
Race Director
Member Since: Sep 2013
Location: Ft Lauderdale
Posts: 10,434
Received 926 Likes
on
484 Posts
Tech Contributor
You can, but there's a lot of pressure on it and long-term, depending on how good the insulation is , it Might come loose. That's why Chevy bolts it on. At least 3 Bolts recommended.
Last edited by Glen e; 09-25-2016 at 09:55 AM.
#3
Team Owner
Yes you can, did this with my C6 and never had any issues.
#4
Race Director
drilled 7 holes
The following users liked this post:
Gonzo (09-25-2016)
#5
Le Mans Master
Member Since: Jul 2015
Location: Northern California
Posts: 6,223
Received 1,694 Likes
on
1,240 Posts
St. Jude Donor '15
I've seen people with tape only installs on here. I'm sure it would be fine, but I'm also sure if a taped on spoiler went flying off they aren't in any hurry to post about it on the internet.
#7
Pro
I have a Z51 and removed the stock spoiler to mount the High Wing spoiler. I used two plastic body panel plugs and had them painted to match. Then I silicone them in the extra holes. It's not a perfect solution but it works perfectly and no one has ever asked about them.
I added a picture so you can see what I mean.
Last edited by springer-; 09-25-2016 at 04:39 PM.
#8
Race Director
#9
Le Mans Master
Member Since: Nov 2015
Location: Lake Havasu City Arizona
Posts: 7,326
Received 3,439 Likes
on
2,059 Posts
#10
Le Mans Master
#11
Administrator
Member Since: Mar 2001
Location: In a parallel universe. Currently own 2014 Stingray Coupe.
Posts: 342,929
Received 19,293 Likes
on
13,966 Posts
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-
'20-'21-'22-'23-'24
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
That high wing spoiler sure looks good. I think I would want it bolted on, but the 3M tape would probably work well too.
#12
That wing spoiler is the best-looking one out there! If I thought I could replace my Z51 spoiler with that easily, I would do that in a heartbeat.
#13
Pro
#14
Race Director
#15
Melting Slicks
Member Since: May 2006
Location: Williamsburg VA
Posts: 3,498
Received 517 Likes
on
303 Posts
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15-'16
From what I understand they can not be ordered as an installed item. It is also listed as "Does not fit Z51". The reason for that is the Z51 spoiler (and the GS/Z06) uses 9 bolts to hold it on. The High Wing Spoiler shown in the pictures only uses 7 bolts to hold it on. This leaves 2 exposed extra bolt holes in the rear cover. Note the GS and Z06 have a wider rear cover but the bolt holes are the same afaik.
I have a Z51 and removed the stock spoiler to mount the High Wing spoiler. I used two plastic body panel plugs and had them painted to match. Then I silicone them in the extra holes. It's not a perfect solution but it works perfectly and no one has ever asked about them.
I added a picture so you can see what I mean.
I have a Z51 and removed the stock spoiler to mount the High Wing spoiler. I used two plastic body panel plugs and had them painted to match. Then I silicone them in the extra holes. It's not a perfect solution but it works perfectly and no one has ever asked about them.
I added a picture so you can see what I mean.