New XO Verona Wheels.. Now What Size Tires
#1
Drifting
Thread Starter
New XO Verona Wheels.. Now What Size Tires
Just purchased a new set of XO Verona wheels (19x9 1/2 & 20x11) for my 2014 Z51. I'd like to hear from you guys on what brand and size tires that you're using on your Vette. My car is lowered on the stock bolts. I'd like to go a little bigger but I don't want any tires rubs. Thank you for your time and replies..
The following users liked this post:
John Micheal Henry (02-16-2017)
#6
Drifting
Thread Starter
7LitreC5 thanks for your reply. Here's what I'm going to run, a new set or factory original Michelin Pilot Super Sport ZP. Can you tell any difference in the handling or ride with the one inch wider wheels all around? By the way you car looks Great. Has your Vette been lowered on the stock bolts??
Last edited by John Micheal Henry; 02-16-2017 at 05:04 PM. Reason: Correction
The following users liked this post:
7LitreC5 (02-16-2017)
#7
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,356
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
John Michael, I'm glad you pulled the trigger on these wheels! I hope I was able to help you make your decision.
I'm lowered with OEM sized rubber and no rubbing-plus, I'm lowered too.
What color wheels did you decide on?
I'm lowered with OEM sized rubber and no rubbing-plus, I'm lowered too.
What color wheels did you decide on?
The following users liked this post:
John Micheal Henry (02-16-2017)
#9
Le Mans Master
Thanks. My car is at stock ride height. The front may be a tiny bit lower than stock due to the extra weight of the Edelbrock EForce.
I got my wheels/tires in the middle of winter so I have not driven it enough to be able to answer the ride quality question.
I got my wheels/tires in the middle of winter so I have not driven it enough to be able to answer the ride quality question.
7LitreC5 thanks for your reply. Here's what I'm going to run, a new set or factory original Michelin Pilot Super Sport ZP. Can you tell any difference in the handling or ride with the one inch wider wheels all around? By the way you car looks Great. Has your Vette been lowered on the stock bolts??
#10
I'm thinking of pulling the trigger on these as well next month. Do the stock run flats fit these wheels or do you have to get new tires as well? thanks, sorry for hijacking.
The following users liked this post:
SharkGrayStingray (02-16-2017)
#12
I just looked up oem z51 and both veronas are an inch wider than stock. Will that look ok/normal or will it look weird? I've never been a wheel guy, so i am clueless...