Removing the right side dash pad.
#1
Drifting
Thread Starter
Removing the right side dash pad.
I have the glove box out and 3 of the 5 screws out. Must you remove the aluminum plate inside the glovebox to access the 2 center screws?
Dave K.
Dave K.
#2
Drifting
May find what you're looking for in this how to sticky.
https://www.corvetteforum.com/forums...nger-dash.html
https://www.corvetteforum.com/forums...nger-dash.html
#3
Drifting
Thread Starter
Thanks but already used this. Not enough detail showing where center screws holding dash pad are located.
May find what you're looking for in this how to sticky.
https://www.corvetteforum.com/forums...nger-dash.html
https://www.corvetteforum.com/forums...nger-dash.html
#4
Drifting
Thread Starter
I removed the dash pad. The problem was that GM during assembly did not align the aluminum glove box frame to the point that I could get access to the upper screws. Drilled access holes through the frame which gave me access to the two screws.