Forged Wheel Sale - Best pricing, hands down!
#301
Black Chrome PVD
Do you have any photos of Forgelines in their Black Chrome PVD finish?
#302
Safety Car
Thread Starter
Member Since: Jan 2012
Location: Cin City
Posts: 4,885
Received 481 Likes
on
317 Posts
St. Jude Donor '14
#303
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
ttt
^^^^the black chrome is the best looking rims on these cars.. That is if you into the black rims at all look. Robert
The following users liked this post:
Ben@WeaponX (05-22-2016)
#304
Yes I've done quite a few sets already and just put two more in last week. They're my personal favorite right now! Here are some pics on Brian's Z06. It's a tough color to capture in pics for sure but it's incredible in person. It's black, it's smoke, it's chrome, racy, and luxury all in one finish.
#305
Our new "Black Chrome PVD" finish is a unique combination that starts with a polished surface finish and then gets combined with a Black PVD (physical vapor deposition) coating. This unique finish provides an appearance very similar to black chrome, but with the benefits of a much more durable pvd coating (which is less susceptible to corrosion and chipping than real chrome)!
#306
Safety Car
Thread Starter
Member Since: Jan 2012
Location: Cin City
Posts: 4,885
Received 481 Likes
on
317 Posts
St. Jude Donor '14
That I am. From the Forgeline website:
Our new "Black Chrome PVD" finish is a unique combination that starts with a polished surface finish and then gets combined with a Black PVD (physical vapor deposition) coating. This unique finish provides an appearance very similar to black chrome, but with the benefits of a much more durable pvd coating (which is less susceptible to corrosion and chipping than real chrome)!
Our new "Black Chrome PVD" finish is a unique combination that starts with a polished surface finish and then gets combined with a Black PVD (physical vapor deposition) coating. This unique finish provides an appearance very similar to black chrome, but with the benefits of a much more durable pvd coating (which is less susceptible to corrosion and chipping than real chrome)!
#307
Do you ever work with Joe@CPR? I live in the Phoenix area and prefer to do all my C7 stuff thru him.
#308
#309
Supporting Vendor
The following users liked this post:
Ben@WeaponX (05-22-2016)
#311
The following users liked this post:
Ben@WeaponX (05-24-2016)
#316
Le Mans Master
Ben can you post more pics of Z51 with 18's. I think that is the set up I would like to go with. Even 17's up from and 18's out back if possible. If not 18's all around would work.
#317
These ForgeLine CR3's are knock-outs as well.
#318
Safety Car
Thread Starter
Member Since: Jan 2012
Location: Cin City
Posts: 4,885
Received 481 Likes
on
317 Posts
St. Jude Donor '14
I was eager to bring a solution for the C7 for 18" drag and track wheels, so I worked closely with Steve at Forgeline. We spec'ed out a drag racing and square track racing setup. They turned them around in just 3 weeks and since the weather has cleared up, I finally got my wheels mounted up and on my C7. The fronts are 18x6 on M&H skinnies, the rears are 18x11" on M&H 325s. I lowered the car on the factory bolts while I had the wheels off too.
These are custom 3pc wheels at amazing prices and are the perfect offset to run wide tires.
For track racing we can do a square setup of 18x9, 9.5, or 10" all around.
For drag racing we can do 18x6 to 18x10" fronts and 18x10 to 11.5" rears.
Enjoy!
love the fat rears and skinnies up front in this pic
perfect offset up the sides
good bye....
These are custom 3pc wheels at amazing prices and are the perfect offset to run wide tires.
For track racing we can do a square setup of 18x9, 9.5, or 10" all around.
For drag racing we can do 18x6 to 18x10" fronts and 18x10 to 11.5" rears.
Enjoy!
love the fat rears and skinnies up front in this pic
perfect offset up the sides
good bye....
The following users liked this post:
marcouvo (05-27-2016)