How CPR does nitrous on a C7!
#1
Supporting Vendor
Thread Starter
How CPR does nitrous on a C7!
So we have a C7 here we finished up and while I can't post dyno video's just yet per the owner's request (mon I can) I will say the car made 990 rwhp 925 rwtq on a 100% stock bottom end. Car has the following mods
Procharger kit w/ D1 w/ 3.55 pulley (12psi is what we saw)
CPR 2'' longtube headers
CPR custom cam (big lol)
Alky control meth kit w/ dual nozzle
Nitrous outlet plate system jetted for a 200 shot w/ a standalone fuel cell
100% stock bottom end, clutch, etc, etc.
On blower only the car made 720/655 rwhp/rwtq.
We did something really trick w/ the nitrous switch's and figured I would post up a video to show you until mon when we can throw up the dyno video.
Procharger kit w/ D1 w/ 3.55 pulley (12psi is what we saw)
CPR 2'' longtube headers
CPR custom cam (big lol)
Alky control meth kit w/ dual nozzle
Nitrous outlet plate system jetted for a 200 shot w/ a standalone fuel cell
100% stock bottom end, clutch, etc, etc.
On blower only the car made 720/655 rwhp/rwtq.
We did something really trick w/ the nitrous switch's and figured I would post up a video to show you until mon when we can throw up the dyno video.
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914