When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I personally would only get the base Z51 kit without the larger rear bar. You don't need that bar unless you're doing autocross or road racing and extremely spirited cornering driver.
Thanks you'll be hearing from me in about a month. Picking car up next Wednesday at the Museum then two week road trip home!
We have added the Z51 sway bar kit with the rear magnetic ride bar to our listing. Let us know if you would like a set or you can order on the site at the link below! http://www.cultragfactoryparts.com/c...s/?parent=1001
We have added the Z51 sway bar kit with the rear magnetic ride bar to our listing. Let us know if you would like a set or you can order on the site at the link below! http://www.cultragfactoryparts.com/c...s/?parent=1001
Whats the difference between the rear magnetic ride bar and the non-magnetic ride bar ?
So, I have read some posts on here that say the non mag sway bars don't stop the rolling. I have also read that the mag bars induce overseer. Which is true? Do dealers still refuse to install these on base cars?
So, I have read some posts on here that say the non mag sway bars don't stop the rolling. I have also read that the mag bars induce overseer. Which is true? Do dealers still refuse to install these on base cars?
I think you're reading a lot of nonsense. We have quite a few people who say the standard Z51 bars greatly increased the loss of body roll. In my opinion if you don't have the right tire width in the rear you will have oversteer with the mag ride, aka Z06 rear sway bar. I would not install that one unless you are doing autocross or road racing.
04-14-2016, 03:31 PM
