Axle back upgrade
#1
Racer
Thread Starter
Axle back upgrade
Totally stock exhaust 1LT here non NPP. Looking for a nice deep axle back setup but no drone, any suggestions.
Last edited by jdarc1; 11-25-2016 at 05:17 PM.
#2
Team Owner
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes
on
1,529 Posts
#5
Supporting Vendor
I'd do B&B personally. Done quite a few different systems on C7's and that is easily my favorite sound. We do carry all the major brands btw.
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
#6
Racer
Thread Starter
#7
Racer
Thread Starter
I really dont want headers. I have a built 1/4 mile camaro with all of those bells and whistles. Headers in the C7 may get too loud, im already able to turn 10's in 1/4 mile , dont need to be any faster, Im S/C and spraying meth. Just want a bit of a nastier sound with no drone in the cabin.
#8
Le Mans Master
Member Since: Aug 2005
Location: CA.
Posts: 5,255
Likes: 0
Received 281 Likes
on
258 Posts
St. Jude Donor '13-'14-'15
Here where I am In Calif most all C7 owners have chosen to go without mufflers entirely
I have no mufflers on my car and love the sound
During start up it barks nicely---and then settles down quite nicely ( same as the NPP set-up)
While in town or cruising on the freeway it sounds just barely louder than a car with NPP opened----I can hear the radio talk in the car and talk on the phone easily
However when you hit the loud pedal it has a tremendous "race car" growl "
No drone---no rattles----I have the stock exhaust manifolds
We all used the Flowmaster stainless 4" dual quad double walled tips--Inlet size is 2.5" Cost aprox $85 My local muffler shop fashioned about a 12" piece of tubing with the correct bends to hook them up----Cost at the muffler shop was $125----
So total cost was around $200---and to me sounds far superior to any other system I have heard------Plus No Corvette tax !!!!!!!!!!!
I have no mufflers on my car and love the sound
During start up it barks nicely---and then settles down quite nicely ( same as the NPP set-up)
While in town or cruising on the freeway it sounds just barely louder than a car with NPP opened----I can hear the radio talk in the car and talk on the phone easily
However when you hit the loud pedal it has a tremendous "race car" growl "
No drone---no rattles----I have the stock exhaust manifolds
We all used the Flowmaster stainless 4" dual quad double walled tips--Inlet size is 2.5" Cost aprox $85 My local muffler shop fashioned about a 12" piece of tubing with the correct bends to hook them up----Cost at the muffler shop was $125----
So total cost was around $200---and to me sounds far superior to any other system I have heard------Plus No Corvette tax !!!!!!!!!!!
Last edited by tblu92; 11-26-2016 at 06:56 PM.
#9
Supporting Vendor
#10
Racer
Thread Starter
#11
Supporting Vendor
www.cordesracing.com
I might not have them on our webstore as I am the one building it, and well it's a lot of parts haha. But I do carry them and match all the other online guys.
I might not have them on our webstore as I am the one building it, and well it's a lot of parts haha. But I do carry them and match all the other online guys.
#12
Jdarc, you may like our Street axleback (15225/15316). It brings out the deep V8 growl without being too obnoxious for daily driving. The volume during idle and cruising is quite conservative, but really opens up once you get on the throttle! Let us know if you have any questions!
Polished: http://www.magnaflow.com/products?partNumber=15225
Black: http://www.magnaflow.com/products?partNumber=15316
Polished: http://www.magnaflow.com/products?partNumber=15225
Black: http://www.magnaflow.com/products?partNumber=15316