Get Your Genuine GM 2014 Corvette C7 Front License Plate Bracket From GM Parts House!
#1
Premium Supporting Vendor
Thread Starter
Get Your Genuine GM 2014 Corvette C7 Front License Plate Bracket From GM Parts House!
Front License Plate Bracket
For states that require front license plates, this Carbon Flash Front Bumper Molding Frame Kit fastens to the front fascia without drilling any holes in the bodywork.
2014 C7 Corvette Front License Plate Bracket
22979545 Photograph
http://www.gmpartshouse.com/accpics/22979545.jpg
22979545 – Carbon Flash - $135.48
To order go to www.gmpartshouse.com and use the part number of your choice and be sure to select Chevrolet make.
Availability on the C7 accessories is volatile so if you need the item by a certain date or time or if you want to know how long it takes to get it please contact us directly before placing an order.
For states that require front license plates, this Carbon Flash Front Bumper Molding Frame Kit fastens to the front fascia without drilling any holes in the bodywork.
2014 C7 Corvette Front License Plate Bracket
22979545 Photograph
http://www.gmpartshouse.com/accpics/22979545.jpg
22979545 – Carbon Flash - $135.48
To order go to www.gmpartshouse.com and use the part number of your choice and be sure to select Chevrolet make.
Availability on the C7 accessories is volatile so if you need the item by a certain date or time or if you want to know how long it takes to get it please contact us directly before placing an order.
__________________
Phone: 484-334-8833
Owner of CULTRAG Performance
Shop Our Factory GM Parts Website
Phone: 484-334-8833
Owner of CULTRAG Performance
Shop Our Factory GM Parts Website
Last edited by Gene Culley; 02-12-2014 at 11:27 PM.
#3
Premium Supporting Vendor
Thread Starter
After selling two of these this week and not what the customer expected; we checked into it and this is not a license plate bracket, even though GM calls it as such. This is a cover to cover up the license plate bracket when the plate is removed. I guess to make it look nicer at a show or something?
#5
Melting Slicks
Gene-
On Another subject. Do you have plans to offer a rear, and possibly a front. Z51 sway bar kit for the base c7? I'm not sure whether the front sways are different on the Z51. Some other vendors are offering kits for the rear only, suggesting perhaps that the fronts are the same, although I would doubt it. What say you?
On Another subject. Do you have plans to offer a rear, and possibly a front. Z51 sway bar kit for the base c7? I'm not sure whether the front sways are different on the Z51. Some other vendors are offering kits for the rear only, suggesting perhaps that the fronts are the same, although I would doubt it. What say you?
#6
Premium Supporting Vendor
Thread Starter
Gene-
On Another subject. Do you have plans to offer a rear, and possibly a front. Z51 sway bar kit for the base c7? I'm not sure whether the front sways are different on the Z51. Some other vendors are offering kits for the rear only, suggesting perhaps that the fronts are the same, although I would doubt it. What say you?
On Another subject. Do you have plans to offer a rear, and possibly a front. Z51 sway bar kit for the base c7? I'm not sure whether the front sways are different on the Z51. Some other vendors are offering kits for the rear only, suggesting perhaps that the fronts are the same, although I would doubt it. What say you?
#9
Premium Supporting Vendor
Thread Starter
Is this yours? I need more information. A couple of customers called and said they couldn't get it to work. I got another one and opened it up and #1, it is not clear on how it attaches and #2 it was convex, meaning there would be no way for the plate to mount flush to the mount as you would have to bend the plate for it to work?
#10
Melting Slicks
Member Since: May 2006
Location: Westchester County New York
Posts: 2,934
Received 258 Likes
on
171 Posts
Is this yours? I need more information. A couple of customers called and said they couldn't get it to work. I got another one and opened it up and #1, it is not clear on how it attaches and #2 it was convex, meaning there would be no way for the plate to mount flush to the mount as you would have to bend the plate for it to work?
See this thread:
http://forums.corvetteforum.com/c7-g...with-pics.html
#12
Premium Supporting Vendor
Thread Starter
Yes it's mine and it looks and fits great...there are dimples that mark where you need to drill a pilot hole for the plate screws when you take the cover piece off.,,
See this thread:
http://forums.corvetteforum.com/c7-g...with-pics.html
See this thread:
http://forums.corvetteforum.com/c7-g...with-pics.html