RPIDON

C7 Corvette Stingray Front Splitter Stage 2

Are you looking to give your C7 Corvette Stingray just a little more of an aggressive look? Look no further than our side skirts and front splitters. We offer our pieces in Carbon Flash Metallic to match the exterior trim pieces on your Stingray, we also offer them painted and 2014 Corvette body color, flat black and hydro carbon fiber. Our kit includes our front splitter and all hardware to complete installation.

RPI Designs has been making, painting and selling Corvette parts for over 15 years, we are so confident that you'll love your front splitter that we offer a 100% money back guarantee.


Item # C7-1080 use Coupon Code RPIDON5 on line or on phone during check out and receive 5% off the listed website price!!

Website Link : http://www.rpidesigns.com/shop/item.aspx?itemid=3361

Now with an available splitter Deflectors for Stage 2 front splitter painted flat black $79.95 painted to match body color $109.95

Steve Snake Driver

Are the extended sides hints of further additions (winglets/deflectors)?

RPI Designs

Those will come out in about 4 weeks. You will be able to add them to the splitter if you'd like. We are working on those now. Most guys didn't want them and we left them off the initial design.

bluvette2000

Need to know exactly how much this splitter lowers the front ground clearance. Hard to tell from these photos.

RPIDON

It does not lower it that much, It is still higher than a C6 ZR1 with a ZR1 splitter. We will post more pictures soon with measurements. Thanks, Don

WackyBob

Very nice.....I hope it won't make it too low and scrape. Does it bolt onto stock locations or does it require drilling?

RPIDON

Thank you, Ground clearance should be fine, you just have to be careful pulling into steep driveways like you normally would be careful driving any type of sports car. Since the car does not come with a front splitter from the factory there are no factory holes, you would have to drill the small holes for the attaching screws, the hole size is 3/32 of an inch. Thanks, Don

jb306y

Anything on the winglets/deflectors yet,, pictures? I have a Stage 2 splitter and side skirts on order and would like to see the winglets so I can see if I want to go ahead and buy them now.

Thanks,

By the way, what's the delivery times running on the Stage 2 stuff in carbon flash? You can PM me if you want.

RPIDON

Hi Jb306y, Thank you for the order, At the moment I do not have any updates on the winglets. Currently it is taken 3-4 weeks to paint and ship from the time the order was placed. Thanks, Don

jb306y

Thanks Don, I talked to you earlier this week on the phone. It's great to hear you guys are getting back up and running.

You can put me down for a set of winglets when you start producing them.

Thanks,
Jim

RPI Designs

RPI Designs

We are making, painting and shipping these out each day now!

RPI Designs

We appreciate the business.

Butch_N

Hi how much more does it lower front ?
Also I saw its not recommended for speeds greater 140 Mile why ?

Thanks

RPIDON

Thank you for asking, it lowers it by 1.5 inches. The reason for the warning because since it is a true front splitter at greater speeds it will be creating a down force on the vehicle. The front splitter is attached to the bumper and it is not attached to a support that goes to the frame like they had on the zr1 cars, so the more down force that is created it is going to start to pull down on the front fascia, that is why we advise for speeds less than 140 MPH. Thanks, Don

Butch_N

Thanks Don
I already have a curb detector installed in front of existing strip under bumper is Stage 2 lower that is ?

RPIDON

Hi Butch, I sent you an email giving you an idea of how you can test ground clearance on your car, check it out and let me know, if you install the front splitter on the c7 the curb alert sensor will need to be mounted in the grille instead of underneath the car. Thanks, Don

RPI Designs

C7 Corvette Stingray Front Splitter Stage 2

Are you looking to give your C7 Corvette Stingray just a little more of an aggressive look? Look no further than our side skirts and front splitters. We offer our pieces in Carbon Flash Metallic to match the exterior trim pieces on your Stingray, we also offer them painted and 2014 Corvette body color, flat black and hydro carbon fiber. Our kit includes our front splitter and all hardware to complete installation.

RPI Designs has been making, painting and selling Corvette parts for over 15 years, we are so confident that you'll love your front splitter that we offer a 100% money back guarantee.


Item # C7-1080 Price $539.95 use Coupon Code RPIDON5 on line or on phone during check out and receive 5% off the listed price!!

Website Link : http://www.rpidesigns.com/shop/item.aspx?itemid=3361

RPI Designs

jbradleyz

Will you be installing these at Carlisle or just selling them? Thanks