When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
C7 Alky Control Methanol Injection Systems | JDP Motorsports
JDP Motorsportsis proud to offer, use and install Alky Control Methanol Injections systems!
With the flood of Injection systems on the market today, A little research and you will notice that most if not all provide systems based on a 50/50 mix. When you purchase an Injection system from Alkycontrol you’re getting a product that’s been tested time and time again by some of the fastest out there, be it cars, trucks, jet skis, airboats, and even a world record holding airplane. If it has a piston/rotor on boost, it will benefit from our injection system.
Alky Control methanol injection system for the 2014-2018 C7 Corvette and 2015-2018 C7 Z06 Corvette features a boost referenced, progressive meth controller which automatically releases increasing amounts of methanol as boost increases. This progression ensures smooth and even fuel delivery so that the transition or power remains smooth all the way up to redline. Alky Control Systems use only the best components. Braided Stainless Steel Lines, a High Volume Methanol specific pump, sealed electrical connectors and brass fittings.
Methanol is a highly effective addition for your force induced car for a number of reasons. First, Methanol injection is a highly efficient chemical intercooler. By injecting methanol into the inlet of a supercharged car, intake air temperatures (IAT’s) can be reduced by more than 80% (depending on ambient air temperatures) and allow your tuner to run more timing and therefore making more HP. Secondly, Methanol burns at the equivalent of 110 octane fuel, effectively halting detonation that can be present with lower octane fuels. Methanol works to keep your engine cleaner, and helps remove carbon deposits that can form on the pistons, which can effective change engine compression and combustion properties.
Product Features:
PAC Progressive controller
Modified pump (for methanol)
Stainless braided hoses pre-assembled
Complete Harness w/everything needed
2 Bar GM MAP sensor with regulator
Includes Installation Instructions with Tuning Tips
1 Year Parts and Labor Warranty
Options
Dual Nozzle for 650+ RWHP
MSRP: $730.00 Sales Price: $659.95
WE INSTALL PARTS!!
If you are looking to have work performed or have one of our packages installed on your vehicle, we have a facility in Sandy, Utah where we perform everything from bolt-on installations, Dyno testing/tuning and complete race car builds. Our install shop fills up fast, so please call us to set up an appointment. Our expert staff is eager to assist you. We appreciate your interest in our products and have a great day!
Here's a dyno sheet of a 2015 C7 we just finished running this Alky Methanol Injection kit paired with an ECS Supercharger!
Please feel free to contact us at anytime with your questions. Have a great weekend!
Thanks for the orders, Corvette Forum! Please call, email or PM us anytime with questions. We appreciate your interest in our products and have a great day!
We got coupon codes for days! Let us know the part and you'll see how low we can go! Feel free to call, PM or email us at any time. Have a great day guys .
05-05-2015, 11:24 AM
C7 Alky Control Methanol Injection Systems | JDP Motorsports
