Forgeline, ADV.1, HRE, Forgiato, AFM Wheels Best Pricing, Best Service Worldwide!!
#121
Supporting Vendor
Thread Starter
Alberts new Forgelines from CW4L
__________________
#1 Forged Wheel Master Distributor for Corvettes Worldwide since 2010
Call/Text 440-915-6166
Forgeline*Anrky*HRE*PUR*Brixton*Vorstein er*Akra*Brembo*IPE and Many More....
REVIEWS: http://forums.corvetteforum.com/whee...r-reviews.html
WEBSITE: www.cw4L.com
EMAIL: sales@cw4L.com
PHONE 440-915-6166 CALL OR TEXT ANYTIME!!!
Follow us on Instagram @custom_wheels_for_less
Call/Text 440-915-6166
Forgeline*Anrky*HRE*PUR*Brixton*Vorstein er*Akra*Brembo*IPE and Many More....
REVIEWS: http://forums.corvetteforum.com/whee...r-reviews.html
WEBSITE: www.cw4L.com
EMAIL: sales@cw4L.com
PHONE 440-915-6166 CALL OR TEXT ANYTIME!!!
Follow us on Instagram @custom_wheels_for_less
#122
Supporting Vendor
Thread Starter
Always creating and never resting! The Forgeline engineering department has been thriving on innovation and is proud to launch four new wheel designs and four new finish options, just in time for their debut, at the 2016 PRI Show!
The latest addition to our Heritage Series is the new three piece ML3. With styling references borrowed from the Minilite Trans Am wheels (of the late 1960s & early 1970s), the forged ML3 features ten semi-rounded soft-sided spokes for a retro look that is combined with modern lightweight engineering and manufacturing techniques. It’s available in both deep and shallow concave profiles and a wide range of sizes, including 18, 19, and 20-inch diameters.
Our new Performance Series GF3 combines a traditional 5-spoke design with a track-ready load rating! Suitable for dedicated track and racing applications, the GF3 features a 2100 lb. load rating (per wheel), I-beamed spokes, and clean simple lines. And for real racing applications, it is also available in an Open-Lug Competition Series GF3R variant.
Based on the overwhelming popularity of our monoblock GA1R Open Lug and GS1R Open Lug wheels, we’re happy to introduce the new Open Lug versions of our legendary 3-piece GA3R and GX3R competition wheels! Made from the same forgings and shared designs as the original GA3R and GX3R, the latest GA3R Open Lug and GX3R Open Lug wheels have even more material machined from the center area, for additional weight reduction and improved access to the lugs. Depending on size and offset, these changes can save over a pound of mass from each wheel! Designed for racing, the GA3R Open Lug and GX3R Open Lug wheels are each engineered with a 2100 lb. street-tire load rating (per wheel) to ensure strength and integrity, even when subjected to the massive loads encountered on the stickiest race tires. They’re currently available in 18, 19, and 20-inch sizes and can be ordered without a cap (as a dedicated race wheel) or with a specially-engineered tall center cap (with “Motorsport” engraving) to cover the hub spindle and protect it from the elements.
Four new finish options will also be making their debut, at the 2016 PRI Show. Our new Destroyer Gray is a rich full gloss version of a “primer” gray, an industrial color tone that is very similar to the battleship grays that have graced so many recent high-profile SEMA projects. Our new Pearl White takes basic white to the next level of class, with a pearlescent hue that comes alive, under changing light conditions. And the new Anodized Bronze and Light Anodized Bronze options will make you question your assumptions about the possibilities of a powder coat. Anodized Bronze is a rich bronze color that very closely resembles anodized aluminum (but with the benefits of a much more durable powder coat), while the Light Anodized Bronze variant offers a lighter gold-bronze color that resembles an anodized metal.
#125
Supporting Vendor
Thread Starter
Wanted to say thanks to everyone for making 2016 another incredible record breaking year. In response we are offering two sets of Strasse Forged Monoconcave Wheels at an Unprecedented price for our New Years Promo.
Please call or text Gerry at 440-915-6166
Including our new Carbon Fiber Caps these wheels list at over 12K, be the first Z06 to have these incredible wheels for the new year.
Both Sets 19x10 and 20x12 and will fit C7Z06 w Steel Brakes or Z07 Brakes
SM5R in CARBON, note we will be adding the Carbon Fiber Centercaps that are brand new and cost over $1000
SV1 in CARBON, note we will be adding the Carbon Fiber Centercaps that are brand new and cost over $1000
Please call or text Gerry at 440-915-6166
Including our new Carbon Fiber Caps these wheels list at over 12K, be the first Z06 to have these incredible wheels for the new year.
Both Sets 19x10 and 20x12 and will fit C7Z06 w Steel Brakes or Z07 Brakes
SM5R in CARBON, note we will be adding the Carbon Fiber Centercaps that are brand new and cost over $1000
SV1 in CARBON, note we will be adding the Carbon Fiber Centercaps that are brand new and cost over $1000
#127
Supporting Vendor
Thread Starter
Is there a hole in your plan? We’ve been hearing a lot, lately, about people who got a great deal on some other brands of wheels, took them to the track, and suffered catastrophic failures. It’s a bad situation with potentially serious consequences. The truth is that not all wheels are created equal. And some marketers are quick to slap the term “track” or “race” on a wheel that was never load rated for sustained high speed cornering, in the first place. Hey, we understand that a good deal is hard to overlook and that quality wheels from a reputable company may seem expensive. But before you bet your safety on a bargain, do yourself a favor and conduct a little research. An informed decision might save you more than just money!
#133
Supporting Vendor
Thread Starter
Figured I'd show you guys a few different pictures from our customers on not just the Corvettes. Even though we have been the worlds largest aftermarket Forged Wheel Vendor for Corvettes, we do exotics, sports and luxury vehicles from around the world. Probably you guys never get to see some of the builds we do, so I'll just share a few from time to time. We have many Porsche Builds ongoing as well as 4 BMW F80 M3/M4 builds, we have of course GTR's and a few Vipers.
Enjoy the different pictures, several of these we have done Full Akrapovic Exhaust and some Vorsteiner Aero components, yeah we do that as well
Thanks again everyone, we love our vette customers and will continue to get you the best the wheel world has to offer.
Enjoy the different pictures, several of these we have done Full Akrapovic Exhaust and some Vorsteiner Aero components, yeah we do that as well
Thanks again everyone, we love our vette customers and will continue to get you the best the wheel world has to offer.
#136
Supporting Vendor
Thread Starter
Just a little peek at what we had going this week, how about some HRE's on a Mclaren 675LT, a Bimmer, some strasse SM5R on a Porsche Turbo. A 707 HP Dinan M6 with Strasse SM5R, a BMW M3 on some Strasse and a sick Mercedes for a long time friend and forum Member with Strasse.
We always have vettes in the works, but just wanted to show a little of some of the other projects we are working on.
Anything you need!!!
We always have vettes in the works, but just wanted to show a little of some of the other projects we are working on.
Anything you need!!!
#140
Supporting Vendor
Thread Starter
All Please Please do your homework when buying custom wheels. There is a reason we have been the leader in corvettes and many high end vehicles for wheels because we only carry the best.
There are new companies every day that source and buy components, make wheels and design overseas, we have seen that with with many people losing money on this forum recently with one of them.
I can tell you we only sell wheels FORGED IN THE USA, we don't cut corners and only have the best. I'm sure you have seen the ads for the cheap what appear to be high quality wheels, where are they built? What is the history of the company? I can assure you hi quality forged wheels are not cheap and the companies that we work with provide the best wheels at best prices, you want to take chances eventually you will find out the hard way.
Take the guessing out of Forged Wheels, give us a call or text and I'll be glad to share everything we know, and I stand behind my products 100%
Thanks Forum Members for all your support and please dont fall for those cheap so called FORGED wheels being made overseas.
There are new companies every day that source and buy components, make wheels and design overseas, we have seen that with with many people losing money on this forum recently with one of them.
I can tell you we only sell wheels FORGED IN THE USA, we don't cut corners and only have the best. I'm sure you have seen the ads for the cheap what appear to be high quality wheels, where are they built? What is the history of the company? I can assure you hi quality forged wheels are not cheap and the companies that we work with provide the best wheels at best prices, you want to take chances eventually you will find out the hard way.
Take the guessing out of Forged Wheels, give us a call or text and I'll be glad to share everything we know, and I stand behind my products 100%
Thanks Forum Members for all your support and please dont fall for those cheap so called FORGED wheels being made overseas.