C7 Z06 Discussion General Z06 Corvette Discussion, LT4 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by: GEM Motorsports

***LMR C7Z Air Intake System w/results***

Old 05-29-2015, 12:27 AM
  #1  
Late Model Racecraft
Supporting Vendor
Thread Starter
 
Late Model Racecraft's Avatar
 
Member Since: Nov 2010
Location: Houston, TX
Posts: 3,906
Received 629 Likes on 327 Posts

Default ***LMR C7Z Air Intake System w/results***

We have been doing a lot of testing this week with our standard C7 Intake System, our C7Z System, and our C7Z HX upgrade system.

Here are dyno results from testing on 2 separate vehicles. Both vehicles are bone stock with over 1500 miles on them. This is with no tuning, just bolt on and dyno pulls. All runs were made back to back without shutting off vehicle once system was installed.












Its late here, will post up some more pics and information for everyone to read over the weekend.
__________________
Worlds Quickest C8 Corvette 8.83@160MPH
FIRST C7 Corvette in the 7's & 9's
2019 ZR1 LT5 8.874 @ 155
Current C7 World Record Holder 7.55 @ 184 MPH

Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com

Too many PMs, please call or email instead, thanks!
Old 05-29-2015, 01:21 AM
  #2  
four0nefive
Melting Slicks
 
four0nefive's Avatar
 
Member Since: May 2015
Location: Washington
Posts: 2,347
Received 381 Likes on 236 Posts
Default

Nice! That's a pretty good gain over stock.
Old 05-29-2015, 02:22 AM
  #3  
JMB
Melting Slicks
 
JMB's Avatar
 
Member Since: Aug 2000
Location: Phoenix, AZ USA
Posts: 2,201
Received 449 Likes on 254 Posts

Default

WOW! Congrat's! So bottom line roughly 15 to 20+ HP over the AFe?
Old 05-29-2015, 02:56 PM
  #4  
0NORCAL-SS
Former Vendor
 
NORCAL-SS's Avatar
 
Member Since: May 2014
Location: SAN FRANCISCO CALIFORNIA
Posts: 3,311
Received 328 Likes on 232 Posts
Default

Originally Posted by blown383c4conv
Guys I didn't agree to have my car Guinea pigged with multiple pulls on it
Ouchhhhhhh
Old 05-29-2015, 03:14 PM
  #5  
Z06.
Advanced
 
Z06.'s Avatar
 
Member Since: Jan 2015
Posts: 68
Likes: 0
Received 13 Likes on 3 Posts
Default

Old 05-29-2015, 03:59 PM
  #6  
schaibaa
Burning Brakes
 
schaibaa's Avatar
 
Member Since: Mar 2015
Posts: 1,145
Received 145 Likes on 90 Posts
Default

Especially with his full name on the computer screen --- pretty terrible.

Old 05-29-2015, 04:05 PM
  #7  
Elic
Mr Bowtie
Support Corvetteforum!
 
Elic's Avatar
 
Member Since: Apr 2012
Location: Lexington Kentucky
Posts: 276
Received 29 Likes on 25 Posts

Default

Why was the valve cover off? I see long tubes...

Last edited by Elic; 05-29-2015 at 05:37 PM.
Old 05-29-2015, 04:09 PM
  #8  
Arctic Blastoff
Drifting
 
Arctic Blastoff's Avatar
 
Member Since: Nov 2014
Location: Fort Worth TX
Posts: 1,540
Received 49 Likes on 44 Posts
Default

Confused?so just off the intake it made 630whp without tuning??
Old 05-29-2015, 04:22 PM
  #9  
C7/Z06 Man
Safety Car
 
C7/Z06 Man's Avatar
 
Member Since: Apr 2010
Location: Maryland
Posts: 4,233
Received 449 Likes on 354 Posts

Default

Old 05-29-2015, 05:57 PM
  #10  
99ta316
Pro
 
99ta316's Avatar
 
Member Since: Feb 2002
Location: Charleston SC
Posts: 549
Received 25 Likes on 18 Posts

Default

Originally Posted by JMB
WOW! Congrat's! So bottom line roughly 15 to 20+ HP over the AFe?
Looks to be about the same as AFE. This cars baseline is much higher. I suspect it has work done as seen by the LT headers.
Old 05-29-2015, 06:04 PM
  #11  
tones_Z
Burning Brakes
 
tones_Z's Avatar
 
Member Since: May 2015
Posts: 955
Received 118 Likes on 103 Posts
Default

Originally Posted by Elic
Why was the valve cover off? I see long tubes...
Good catch. Didn't see that till you mentioned it.
I "assumed" they installed one of their "Stage II" packages for that particular car and just showing the fitment/how the air intake looks on a Z06. Again,....this is just me "assuming". I'll let LMR answer those questions.
Old 05-29-2015, 06:22 PM
  #12  
keepupp
Instructor
 
keepupp's Avatar
 
Member Since: Nov 2004
Location: Kings Mills OH
Posts: 211
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by blown383c4conv
A little R&D at my wear and tear.
Wow...if this wasn't authorized I would say a public apology and some compensation of some sort is in order.
Old 05-29-2015, 07:04 PM
  #13  
CFHay
Burning Brakes
 
CFHay's Avatar
 
Member Since: Aug 2006
Posts: 858
Received 98 Likes on 50 Posts

Default

Originally Posted by blown383c4conv
Guys I didn't agree to have my car Guinea pigged with multiple pulls on it
Isn't your car there for their stage 2 package which includes this? Did you really think it wouldn't get thrown on the dyno..
Old 05-29-2015, 07:09 PM
  #14  
schaibaa
Burning Brakes
 
schaibaa's Avatar
 
Member Since: Mar 2015
Posts: 1,145
Received 145 Likes on 90 Posts
Default

They need to dyno but not swap intakes and run extra pulls to compare with a competitor.
Old 05-29-2015, 07:12 PM
  #15  
CFHay
Burning Brakes
 
CFHay's Avatar
 
Member Since: Aug 2006
Posts: 858
Received 98 Likes on 50 Posts

Default

Originally Posted by schaibaa
They need to dyno but not swap intakes and run extra pulls to compare with a competitor.
The AFE runs weren't on his car.
Old 05-29-2015, 08:14 PM
  #16  
schaibaa
Burning Brakes
 
schaibaa's Avatar
 
Member Since: Mar 2015
Posts: 1,145
Received 145 Likes on 90 Posts
Default

Originally Posted by CFHay
The AFE runs weren't on his car.
Interesting ... well I wonder why they are trying to draw a comparison between them if they are on different cars?
Old 05-29-2015, 08:22 PM
  #17  
blown383c4conv
Racer
 
blown383c4conv's Avatar
 
Member Since: Jan 2004
Location: Las Cruces NM
Posts: 298
Received 0 Likes on 0 Posts

Default

Originally Posted by CFHay
Isn't your car there for their stage 2 package which includes this? Did you really think it wouldn't get thrown on the dyno..
My car came in with a halltech already on it, so why does it get a factory intake then a lmr intake put on it with 6 dyno pulls? So no I didn't expect this. A baseline pull and a few dynotuning pulls, yes.

Get notified of new replies

To ***LMR C7Z Air Intake System w/results***

Old 05-29-2015, 08:25 PM
  #18  
keepupp
Instructor
 
keepupp's Avatar
 
Member Since: Nov 2004
Location: Kings Mills OH
Posts: 211
Likes: 0
Received 2 Likes on 2 Posts

Default

Originally Posted by blown383c4conv
My car came in with a halltech already on it, so why does it get a factory intake then a lmr intake put on it with 6 dyno pulls? So no I didn't expect this. A baseline pull and a few dynotuning pulls, yes.
Oh snap, besides the filename can you clearly identify this is your car?
Old 05-29-2015, 08:28 PM
  #19  
schaibaa
Burning Brakes
 
schaibaa's Avatar
 
Member Since: Mar 2015
Posts: 1,145
Received 145 Likes on 90 Posts
Default

Originally Posted by CFHay
The AFE runs weren't on his car.
I think you might just be looking at the top pic vs. the bottom pic - the bottom pic has several different CAI's on it. The top and bottom are different cars, but I'm pretty sure the bottom is the same car.
Old 05-29-2015, 08:30 PM
  #20  
schaibaa
Burning Brakes
 
schaibaa's Avatar
 
Member Since: Mar 2015
Posts: 1,145
Received 145 Likes on 90 Posts
Default

Originally Posted by blown383c4conv
My car came in with a halltech already on it, so why does it get a factory intake then a lmr intake put on it with 6 dyno pulls? So no I didn't expect this. A baseline pull and a few dynotuning pulls, yes.
Looks like a couple runs with an AFE too.

Thread Tools
Search this Thread
Quick Reply: ***LMR C7Z Air Intake System w/results***



All times are GMT -4. The time now is 02:06 PM.