ATco this Tuesday A8/Halltech/MT Drag Radials
#1
ATco this Tuesday A8/Halltech/MT Drag Radials
Just finished installing my Halltech intake and my 18" TSW Nurburgring wheels with MT Drag Radials 305/35/18. Those are my only two mods. Any guesses on what its gonna run? Im hoping for 10.50's already been 127 mph with poor 60' and ran 11.0 Cant wait till tuesday.
#2
Best run tuesday
10.70s at 128. Keep us posted.
#7
Pro
10.70
#9
Race Director
Good luck!
#10
Safety Car
It's going to depend on your 60' time entirely. You should be able to get 3 tenths out of your present mods alone. Take two more tenths off of your 11.0 60' time and I could see you going in the 10.50's.....super fast for the added mods. On top of that, ATCO has good air now.
#11
Banned Scam/Spammer
Anyone who has lived this life knows that E.T. can be confusing with these street driven cars as it is highly dependent on what happens in the first few feet. Trap MPH is a far more reliable barometer of what kinda ***** a car really has. Two cars may have similar E.T.s with one of the two posting 8 or 10 more MPH and being wildly faster and more fun on the street.
Last edited by punky; 10-05-2015 at 10:15 AM.
#12
Drifting
Same exact set up here and I've run a PB of 10.77 at 130. That was in DA of 2300 though. 10.5's are possible with a good launch. My 60' was a 1.62 by the way. Good luck!
#14
Race Director
Good luck. I can't wait to hear what you run. Since you now know that 18's will clear the rear brakes, do you think a 17" rim is possible?
#15
Race Director
#16
BP should be around 30.1-30.2 and temps will be in the 50's in the early morning and low 70's by the afternoon. Humidity should be 50%-55%...so, with a track elevation of less than 100ft...well, you can do the math.
Right now...the dew point at Atco is 47 degrees...pretty good stuff.
Right now...the dew point at Atco is 47 degrees...pretty good stuff.
Last edited by NGS; 10-05-2015 at 03:45 PM.
The following users liked this post:
tail_lights (10-05-2015)
#19
Drifting
Saying 10.6