Custom Stereo System Install
#21
Advanced
Thread Starter
#23
Advanced
Thread Starter
I'm heading out of town tomorrow but unfortunately won't see it anymore til completion. Here is a sneak peak of what they sent me today.
The following users liked this post:
VictorBarron (03-09-2016)
#24
What Focal speakers are going in the doors? I am looking that their Flax 3 series.
I am using Mosconi 100.4's x2 and a 100.2 along with a 6to8 with the controller.
Also doing K40 front and rear, with lasers.
Along with a curb alert in front.
Normally I do my own mods, but this time, I don't have time.
I am using Mosconi 100.4's x2 and a 100.2 along with a 6to8 with the controller.
Also doing K40 front and rear, with lasers.
Along with a curb alert in front.
Normally I do my own mods, but this time, I don't have time.
#25
Advanced
Thread Starter
Focal just Released their new version of their k2 power after several years of the older version. I believe to take the place of their burilium line.
#27
Advanced
Thread Starter
#29
Drifting
Quality stuff going in ! Going to sound great, look forward to the update.
#30
Advanced
Thread Starter
The tweeter pods are made of 100% cast cell acrylic, layered together. The front trim ring is brushed aluminum to match the accents on the door. The front trim ring / grille assembly attaches to the pod with magnets for easy access. There are threaded 1/4-20 inserts mounted into the bottom of the pod for a secure mount to the door panel. Only thing that is not pictured is to wrap the rear insert in black matching leather.
The amp rack houses (3) Mosconi AS Amplifiers. It has a removable insert to gain access to all the system fuses and BCM fuses. It is finished in black alcantara suede, brushed aluminum, and matching red leather. The customer asked for some lit acrylic inserts to accent the product.
The enclosure is layered to create its shape. It houses (2) Focal Flax 8" subwoofers. It has a brushed aluminum trim ring with press grill. It sits in an Alcantara insert that attaches to the enclosure which is wrapped in matching Red Spice leather. A light shines under the arc to accent the shape. The enclosure flows into the amp rack with a "belt" break that features a 1/4 layer of brushed aluminum, 1/2 layer of red spice leather, and 1/4 layer of brushed aluminum.
The amp rack houses (3) Mosconi AS Amplifiers. It has a removable insert to gain access to all the system fuses and BCM fuses. It is finished in black alcantara suede, brushed aluminum, and matching red leather. The customer asked for some lit acrylic inserts to accent the product.
The enclosure is layered to create its shape. It houses (2) Focal Flax 8" subwoofers. It has a brushed aluminum trim ring with press grill. It sits in an Alcantara insert that attaches to the enclosure which is wrapped in matching Red Spice leather. A light shines under the arc to accent the shape. The enclosure flows into the amp rack with a "belt" break that features a 1/4 layer of brushed aluminum, 1/2 layer of red spice leather, and 1/4 layer of brushed aluminum.
Last edited by Gov2094; 04-28-2016 at 09:01 PM. Reason: Finally Done
The following 2 users liked this post by Gov2094:
jaden61 (04-28-2016),
VictorBarron (04-28-2016)
#31
Melting Slicks
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,787
Received 594 Likes
on
408 Posts
2020 Corvette of the Year Finalist (track prepared)
C3 of Year Winner (track prepared) 2019
Just wow.... While not my thing, I can appreciate the attention to detail and craftsmanship that went into this. Very impressive!
#32
Advanced
Thread Starter
#34
Advanced
Thread Starter
#36
Advanced
Thread Starter
Thanks...I would not have known if I didntf2r-4167685094@per.craigslist.com see it torn apart. Lol..I did ask though
#38
Team Owner
Member Since: Oct 2013
Location: Kansas City, Missouri
Posts: 25,347
Received 7,752 Likes
on
4,181 Posts
CORVETTE TODAY Host
St. Jude Donor'15
Man.....that's a hell of a setup.