Best rims for C5?
#3
Drifting
Member Since: Jan 2005
Location: Oil Country
Posts: 1,724
Likes: 0
Received 0 Likes
on
0 Posts
I'm partial to I-Forged but I do like the CCW SP500's. Here's my set-up,
Polished I-Forged Seneka's 19" front/ 20" rear
Like Gettreal ( sorry, don't know your actual name) stated, I think it all comes down to budget though. What are you willing to spend on wheels and rubber? The budget will help us determine what's best for you!!
Polished I-Forged Seneka's 19" front/ 20" rear
Like Gettreal ( sorry, don't know your actual name) stated, I think it all comes down to budget though. What are you willing to spend on wheels and rubber? The budget will help us determine what's best for you!!
#4
Melting Slicks
Thread Starter
I will be working with a tight budget if I proceed.
I have interested in a C5 that has the original tires with low mileage but it has the original aluminum 5 spoke rims - not the polished ones.
I'm not a big fan of these and just wondering what you guys suggest would be a good economical replacement.
Dave
I have interested in a C5 that has the original tires with low mileage but it has the original aluminum 5 spoke rims - not the polished ones.
I'm not a big fan of these and just wondering what you guys suggest would be a good economical replacement.
Dave
#6
Le Mans Master
What's your budget?
Personally, I think the OEM Alcoa/Speedline Z06 wheels look the best on a C5. They're light, they look sharp and you can probably find a used set for around $500.
If you want to step it up a notch, get yourself the Z16 polished Z06 wheels. They look awesome!
Personally, I think the OEM Alcoa/Speedline Z06 wheels look the best on a C5. They're light, they look sharp and you can probably find a used set for around $500.
If you want to step it up a notch, get yourself the Z16 polished Z06 wheels. They look awesome!
#7
Drifting
Member Since: Jan 2005
Location: Oil Country
Posts: 1,724
Likes: 0
Received 0 Likes
on
0 Posts
Well, whenever you go I-forged or CCW, HRE etc. they cost a bit more than the average wheel. Search the parts for sale forum as there usually is a pretty large selection of reproduction wheels or take off wheels with rubber for a good price. I will keep an eye out for you as well and if I see anything I will shoot you a pm. If you'd like send me a pm with your max budget and I'll try my best to locate something that appeals to you!
Tyler
Tyler
#8
Drifting
Member Since: Jan 2005
Location: Oil Country
Posts: 1,724
Likes: 0
Received 0 Likes
on
0 Posts
What's your budget?
Personally, I think the OEM Alcoa/Speedline Z06 wheels look the best on a C5. They're light, they look sharp and you can probably find a used set for around $500.
If you want to step it up a notch, get yourself the Z16 polished Z06 wheels. They look awesome!
Personally, I think the OEM Alcoa/Speedline Z06 wheels look the best on a C5. They're light, they look sharp and you can probably find a used set for around $500.
If you want to step it up a notch, get yourself the Z16 polished Z06 wheels. They look awesome!
Agreed Ken!
#9
Melting Slicks
Thread Starter
How much would a set of polished or chromed Z06 rims cost?
I like them shiney!
What is better polished or chrome?
Do they come in 17 and 18 inch to fit original C5 (non Z06) tires?
Dave
I like them shiney!
What is better polished or chrome?
Do they come in 17 and 18 inch to fit original C5 (non Z06) tires?
Dave
#10
Keep a close on on the US C5 parts for sale section, there is a ton on daily activity.
As for polished VS chrome, I personally would say chrome, because they require much less to keep them clean. Polished do look nice, but tend to spend more precious hours cleaning and polishing to acheive the same look.
Just my .02
As for polished VS chrome, I personally would say chrome, because they require much less to keep them clean. Polished do look nice, but tend to spend more precious hours cleaning and polishing to acheive the same look.
Just my .02
#11
I love the look of the iForged or CCW rims but did not want to spend $3000 for rims my car.
Went with Factory Reproduction Z06 rims in the photos here, $788 out of Texas with $140 shipping and used
my stock rubber, still a nice look without the high cost.
http://www.factoryreproductions.com/...vette&wheel=11
I did not like the center cap stickers that they gave me with the rims so might go with the Cyberdine ones.
http://www.cyberdinegraphics.com/c5_rcaps.html
Went with Factory Reproduction Z06 rims in the photos here, $788 out of Texas with $140 shipping and used
my stock rubber, still a nice look without the high cost.
http://www.factoryreproductions.com/...vette&wheel=11
I did not like the center cap stickers that they gave me with the rims so might go with the Cyberdine ones.
http://www.cyberdinegraphics.com/c5_rcaps.html
#13
I have 4 C6 polished rims for sale....!!! $750\
http://forums.corvetteforum.com/show...hlight=c6+rims
http://forums.corvetteforum.com/show...hlight=c6+rims
Last edited by Bugstyvy; 06-16-2008 at 02:11 PM.
#14
#16
I have had these for a few weeks now and still no bill?
Anyways I have had items from UPS before and never got a brokerage fee, but depends how its shipped also.
http://www.ups.com/content/ca/en/shi...clearance.html
Anyways I have had items from UPS before and never got a brokerage fee, but depends how its shipped also.
http://www.ups.com/content/ca/en/shi...clearance.html
#17
Le Mans Master
The OEM C6 wheels look awesome but you'll have to purchase a new set of tires since the C6 uses 18" front, 19" back.
If you want to keep your stock tires and go chrome, I'd look into a set of Z06 replica's in a stock C5 fitment. The C6 Z06 replica's look like a great option as well.
NOT2MELO, I wonder if you managed to slip through the cracks since UPS is pretty diligent about collecting their fees on the spot. It's Fedex which loves to send you a bill 3 months later. I hate that!
#18
I paid nothing on delivery, but then before have paid for a wire set $29.95 for brokerage
on a $70 parts, then on shipped headers nothing, does not make sense.
The UPS guy told me today some slip thru the cracks as the volume they ship is so vast.
He said, "Your a lucky one, next time they will get you, it happens"
Also maybe the shipper includes the brokerage fee's?
I will let you know if a bill shows up later.
on a $70 parts, then on shipped headers nothing, does not make sense.
The UPS guy told me today some slip thru the cracks as the volume they ship is so vast.
He said, "Your a lucky one, next time they will get you, it happens"
Also maybe the shipper includes the brokerage fee's?
I will let you know if a bill shows up later.
#20
Le Mans Master
Member Since: Apr 2005
Location: Scarborough ONTARIO
Posts: 8,077
Likes: 0
Received 3 Likes
on
3 Posts
Z06 speedline is my choice they are affordable and light weight and they look awesome.