When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Selling full MagnaFlow 15884 system for C6 Corvette. Quad 4" tips, no dents or scratches at all. Cans are painted black with high temp ceramic. Includes all clamps / donut seals required for install. Very easy! Comes with Tru-X pipe as well. (long tubes are not included!)
12whp/11wtq gain by the install of these on C6 LS2:
Looking to sell a c6 z06 3 inch exhaust with valves.
3 inch h pipe and a pair of mufflers. Pretty sure it came of an 09. Low kms
One muffler pipe was cut where it joins the h pipe.
$450
No one is looking for bi mode mufflers ? Open to offers
Last edited by stephenpen; 07-29-2016 at 06:35 AM.
Mickey Thompson Steet Radials
305/35/19
Used briefly on the street for a few weeks,
And I used them at race the runway twice.
Tread depth when new I believe is approx
.200"
These are between .160"-.170"
$520 for the pair, brand new , they are $400 each
Help, just found a big crack in weld at join of exhaust pipe and front of 2nd driver's side cat. Apparently can't be fixed due to titanium or whatever.
Need to replace or get aftermarket and more interested in keeping the car stock.
i just went to kijiji and googled titanium welder and found many.
Originally Posted by Soloontario
Help, just found a big crack in weld at join of exhaust pipe and front of 2nd driver's side cat. Apparently can't be fixed due to titanium or whatever.
Need to replace or get aftermarket and more interested in keeping the car stock.
Help, just found a big crack in weld at join of exhaust pipe and front of 2nd driver's side cat. Apparently can't be fixed due to titanium or whatever.
Need to replace or get aftermarket and more interested in keeping the car stock.
Sorry, I am a total dummy. Just need an H pipe with cats for a 2004 Z06. I think the weld that busted is in the stainless (?) section, not the titanium which should be at the rear. And it is only broken in front of the single driver side cat (not the "second" one)
Last edited by Soloontario; 07-28-2016 at 09:17 PM.
Looking to buy a B&B Bullet exhaust system for my 2014 C7 Corvette. I know, probably a long shot, but thought I'd see what's out there. I'd be willing to buy new as well, if anyone could recommend a good vendor in Canada. Thanks
I have one additional item. I believe these are the mesh grilles for the C6 front bumper. I only have the grilles. No other hardware. What you see is what you get.
Stan.
Meet me at Yorkdale Thursday evening from 8pm to 10pm if you want them.
[quote=ledfootlarry;1592719972]mickey thompson steet radials
305/35/19
used briefly on the street for a few weeks,
and i used them at race the runway twice.
Tread depth when new i believe is approx
.200"
these are between .160"-.170"
$520 for the pair, brand new , they are $400 each
sold !!!
Last edited by LedfootLarry; 08-03-2016 at 05:48 AM.
07-24-2016, 02:03 PM
Magnaflow C6 Exhaust system 15884
