Swap central at champion motors!!!!!
#1
Former Vendor
Thread Starter
Swap central at champion motors!!!!!
Here are some of the projects going on at our shop.
1st off we are swapping out a 5.3 from a GMC Sierra and installing a 6.2L Escalade engine with a Champion Grind Cam, Headers and Valve springs.
2nd is a 2013 CTS-V getting a rebuild after engine failure due to hole in the oil pan. Also Getting a Champion Custom Grind Camshaft.
3rd is a Cadillac STS-V getting a complete rebuild with a Champion tune.
4th is a 1989 BMW E30 M3 which we are painting and swapping a LS3 Crate engine with a Champion Cam, custom headers, custom oil pan, and a tremec 6spd.
5th is a 2011 ZR1 Getting American Racing Headers, LPE Cold Air Intake, LPE 2.6 Upper pulley, Champion Motors Custom Cam, and a New Clutch and Champion tune
6th is a 2015 C7 Stingray 7spd getting American racing mid-length headers, AFE Power cold Air Box and Champion Motors tune
7th we have EZ Street Champion of 2010 with a 1980 Corvette in for a complete colour change and Champion custom high rise hood.
1st off we are swapping out a 5.3 from a GMC Sierra and installing a 6.2L Escalade engine with a Champion Grind Cam, Headers and Valve springs.
2nd is a 2013 CTS-V getting a rebuild after engine failure due to hole in the oil pan. Also Getting a Champion Custom Grind Camshaft.
3rd is a Cadillac STS-V getting a complete rebuild with a Champion tune.
4th is a 1989 BMW E30 M3 which we are painting and swapping a LS3 Crate engine with a Champion Cam, custom headers, custom oil pan, and a tremec 6spd.
5th is a 2011 ZR1 Getting American Racing Headers, LPE Cold Air Intake, LPE 2.6 Upper pulley, Champion Motors Custom Cam, and a New Clutch and Champion tune
6th is a 2015 C7 Stingray 7spd getting American racing mid-length headers, AFE Power cold Air Box and Champion Motors tune
7th we have EZ Street Champion of 2010 with a 1980 Corvette in for a complete colour change and Champion custom high rise hood.
Last edited by Pete@ChampionMotors; 01-30-2015 at 08:26 PM.
#9
Former Vendor
Thread Starter
Here is a couple pics of the new STS-V Engine, and wow that LS3 fits like a glove in this Beemer
Last edited by Pete@ChampionMotors; 02-05-2015 at 10:53 AM.