2010 Grand Sport ECS 1500 Power Glide
#1
Former Vendor
Thread Starter
Member Since: Nov 2002
Location: Toronto Ontario
Posts: 4,003
Likes: 0
Received 11 Likes
on
11 Posts
2010 Grand Sport ECS 1500 Power Glide
We just got this in from another shop that couldn't finish the job. Found bolts loose everywhere. He ask us to finish the project and to dial it in at the track.
#2
Burning Brakes
#3
Melting Slicks
8.9... at 152 mph.Lets see how close i am to telling the truth.Powerglide does not rob any power compared to any other automatic transmission.The supporting mods will help this car run an excellent time.60 foot times in the high 1.3 s and it should do very well.Wouldnt that be impressive for a little 1500 blower.
#6
Safety Car
It's not co-incidence you're the only shop that has the ability to be a forum sponsor in the Canadian section, and the countless amount of customers that praise and spew virtues of your shop.
Just with my experience I've heard several instances were frustrated customers from other shops come to your shop to complete/repair the inability of 'other' shops to complete projects they've started.
Some people/shops talk the talk, some others walk it!
Just with my experience I've heard several instances were frustrated customers from other shops come to your shop to complete/repair the inability of 'other' shops to complete projects they've started.
Some people/shops talk the talk, some others walk it!
Last edited by tlaselva; 11-12-2015 at 08:12 PM.
#7
Melting Slicks
At least now it will get finished properly
#9
Former Vendor
Thread Starter
Member Since: Nov 2002
Location: Toronto Ontario
Posts: 4,003
Likes: 0
Received 11 Likes
on
11 Posts
Found torque converter empty, tranny leaking, diff leaking, missing bolt torque tube to front bell housing, flip drive tensioner bolt, alternator bracket bolt,diff to tranny bolt all not tighten in. Chopped bare electrical wires.
#11
Former Vendor
Thread Starter
Member Since: Nov 2002
Location: Toronto Ontario
Posts: 4,003
Likes: 0
Received 11 Likes
on
11 Posts
Not completed. Looks like everything was slapped together. Were installing RSD roll bar, rear brake conversion for 15" wheels,over the axle tail pipes, 10 rib idler tensioner pulleys,water pump for 10 rib set up. ZR1 front splitter and side skirts.
Last edited by Rob@ChampionMotors; 11-17-2015 at 04:52 PM.
#12
Melting Slicks
In the laurentide lane sporting Caravaggio seats,lighweight rotors,Bead lock wheels ,and lets not forget functional a/c and navigation to keep the driver cool and headed in the right direction .......The Batmobile.In the Molson lane whoever is stupid enough to think they have a chance at this thing.Lets not forget its running an ECS 1500 baby blower.i see 150 plus mph coming to a theater near you very soon in roughly 9 seconds flat.