Black C6 saved from the work of another detailer
#1
Drifting
Thread Starter
Black C6 saved from the work of another detailer
This corvette owner sought me out to see if anything could be done to make his car look better. He had had another well known detailer in the bay area work on the car and it "just didn't look right". After about 30 sec it was obvious the previous detailer didn't know how to correctly work the hard corvette clear coat. Heavy DA haze and micro marring were present all over the car along with a few strike-throughs (when people say you can't burn with a DA....that's not exactly true). After 2 days of re-compounding and two more rounds of polishing, this C6 was back to looking sharp again!
upon arrival
lots more DA haze and micromarring
50/50 shot
After compounding
More defects. Also 1/8" 3M Fine Line tape used to protect edge that had be compromised by other detailer, keeping the burn mark from getting larger during correction work.
After
All finished and sealed with Blackfire Wet Diamond
Thanks for looking!
upon arrival
lots more DA haze and micromarring
50/50 shot
After compounding
More defects. Also 1/8" 3M Fine Line tape used to protect edge that had be compromised by other detailer, keeping the burn mark from getting larger during correction work.
After
All finished and sealed with Blackfire Wet Diamond
Thanks for looking!
#7
Drifting
Thread Starter
#8
Instructor
#11
Drifting
Thread Starter
Check these guys out, they are a fellow CQuartz Finest installer and I've sent several Vette guys there and they've been super happy.
The Specialists Detail Studio (http://lasvegasmobiledetail.com/)
Theodore Tzortzis
p. 702-580-6027
e. thespecialists@***.net
6275 Hinson StLas Vegas, NV 89118
#12
Drifting
Thread Starter
#13
Instructor
Check these guys out, they are a fellow CQuartz Finest installer and I've sent several Vette guys there and they've been super happy.
The Specialists Detail Studio (http://lasvegasmobiledetail.com/)
Theodore Tzortzis
p. 702-580-6027
e. thespecialists@***.net
6275 Hinson StLas Vegas, NV 89118
The Specialists Detail Studio (http://lasvegasmobiledetail.com/)
Theodore Tzortzis
p. 702-580-6027
e. thespecialists@***.net
6275 Hinson StLas Vegas, NV 89118
#14
I understand, but everything shows up a lot more obviously on black than other colors that can hide these imperfections more. I'm 1/10th as careful about what touches the surface of my car now that it's not black and it still looks 100 times better than the black car did on a day to day basis.
#16
Melting Slicks
Great job!! I use a spray bottle on M105 to make it work harder, works to.
I see your spray bottle.
Only a pro should work a C5 or C6, takes patience and knowledge as the clear is like concrete.
I see your spray bottle.
Only a pro should work a C5 or C6, takes patience and knowledge as the clear is like concrete.
#17
Team Owner
Great work, awesome results.
#20
Le Mans Master
Nice save... looks great