Lite Dust Removal
#1
Lite Dust Removal
What's the best way/product to remove a film of lite dust from the exterior of a vette. I have a 2015 that I noticed when I let it sit inside of my garage uncovered for a couple of days it will get a film of dust on it.
Is there a quick way/product to remove it?
Thanks
Is there a quick way/product to remove it?
Thanks
#3
Former Vendor
I agree Detail Spray and MF towel will remove the dust safely.
http://adamspolishes.com/shop/exteri...pray-16oz.html
http://adamspolishes.com/shop/exteri...ft-2-pack.html
http://adamspolishes.com/shop/exteri...pray-16oz.html
http://adamspolishes.com/shop/exteri...ft-2-pack.html
#5
Race Director
Member Since: Oct 2004
Location: Cape Cod, Mass.
Posts: 18,763
Received 4,553 Likes
on
2,160 Posts
2023 C3 of the Year Finalist - Unmodified
2021 C8 of the Year Finalist Unmodified
2020 Corvette of the Year Finalist (performance mods)
2019 C1 of Year Winner (performance mods)
2017 Corvette of the Year Finalist
2016 C2 of Year
2015 C3 of Year Finalist
#8
Team Owner
#9
Race Director
If using a duster shake it out first, you must be very careful not to "brush" the car but gently drag the fringe of the duster over the surface with no pressure. I have seen people use a duster like a toothbrush which is the worst thing you can do.
First blow the car off with compressed air or a leaf blower. Then beginning with the top surfaces, very gently use a high quality MF towel and a mist of quick detailer. Be gentle and you should have good scratch free results. Dark color cars are the worst for holograms and swirls, so be extra careful.
First blow the car off with compressed air or a leaf blower. Then beginning with the top surfaces, very gently use a high quality MF towel and a mist of quick detailer. Be gentle and you should have good scratch free results. Dark color cars are the worst for holograms and swirls, so be extra careful.