C4 sway bars looking for a home
05-17-2006, 01:20 PM
#1
Waka, Waka, Waka!
Thread Starter
Member Since: Jun 2002
Location: Richmond Virginia
Posts: 2,435
Likes: 0
Received 1 Like
on
1 Post
CI 4-6-8 & 10 Veteran
St. Jude Contributor
C4 sway bars looking for a home
Hi all
I avoid cross posting when possible, but I've had a few people suggest that I mention this in the autocross section.
I've got upgraded sway bars listed in C4 parts, but after some initial traffic, it has fallen off the front pages.
http://forums.corvetteforum.com/show....php?t=1389376
Here is the basics.
These were removed from a 52K mile 87.
One used 26mm solid rear swaybar with poly bushings.
$110 plus shipping
One used 30mm solid front swaybar with poly bushings.
$110 plus shipping
Or $200 for both. Shipping is obviously extra, but I will deliver within a reasonable range of Norfolk Va. for a small fee.
and, of course, the pics.
Here is a shot of them in my back yard
http://www.vc-technologies.com/ebay/IMG_2614.JPG
The right side for them
http://www.vc-technologies.com/ebay/IMG_2615.JPG
The left
http://www.vc-technologies.com/ebay/IMG_2616.JPG
and a close up of the condition of the bushings
http://www.vc-technologies.com/ebay/IMG_2617.JPG
Seeing as they are solid steel bars, I didn't think super big high-res shots would help... you can see what is included, that the bushings are good and the steel is not rusted from these pics. But if you are serious about buying and have any concerns, let me know what you want additional pics of.
.
I avoid cross posting when possible, but I've had a few people suggest that I mention this in the autocross section.
I've got upgraded sway bars listed in C4 parts, but after some initial traffic, it has fallen off the front pages.
http://forums.corvetteforum.com/show....php?t=1389376
Here is the basics.
These were removed from a 52K mile 87.
One used 26mm solid rear swaybar with poly bushings.
$110 plus shipping
One used 30mm solid front swaybar with poly bushings.
$110 plus shipping
Or $200 for both. Shipping is obviously extra, but I will deliver within a reasonable range of Norfolk Va. for a small fee.
and, of course, the pics.
Here is a shot of them in my back yard
http://www.vc-technologies.com/ebay/IMG_2614.JPG
The right side for them
http://www.vc-technologies.com/ebay/IMG_2615.JPG
The left
http://www.vc-technologies.com/ebay/IMG_2616.JPG
and a close up of the condition of the bushings
http://www.vc-technologies.com/ebay/IMG_2617.JPG
Seeing as they are solid steel bars, I didn't think super big high-res shots would help... you can see what is included, that the bushings are good and the steel is not rusted from these pics. But if you are serious about buying and have any concerns, let me know what you want additional pics of.
.
05-18-2006, 02:31 PM
#2
Le Mans Master
I wonder if these will fit on my 96. I am in the process of researching what direction I should go with my suspension and I will keep you in mind. Seems hard to find the 30mm front bar these days and the 32 seems like overkill. 
05-19-2006, 08:21 AM
#3
Melting Slicks
05-19-2006, 10:00 AM
#4
Waka, Waka, Waka!
Thread Starter
Member Since: Jun 2002
Location: Richmond Virginia
Posts: 2,435
Likes: 0
Received 1 Like
on
1 Post
CI 4-6-8 & 10 Veteran
St. Jude Contributor
Originally Posted by ZR1 MK
I have some one interested in the 30 mm bar. Email gschub1469@aol.com either way.
05-19-2006, 10:01 AM
#5
Waka, Waka, Waka!
Thread Starter
Member Since: Jun 2002
Location: Richmond Virginia
Posts: 2,435
Likes: 0
Received 1 Like
on
1 Post
CI 4-6-8 & 10 Veteran
St. Jude Contributor
Originally Posted by C4DC
I wonder if these will fit on my 96.
...
...
05-19-2006, 04:24 PM
#6
Melting Slicks
Originally Posted by Fozzy_Bear
What do you mean by "either way" ? If you were asking if it is still available, yes it is. PM me with the zip code to be shipped to and I'll respond with a shipping total.