Harbar Camber plates F/S
#1
Pro
Thread Starter
Member Since: Jul 2001
Location: Bradenton FL FL
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Harbar Camber plates F/S
**********SOLD************
These gave me -1.5* camber at the rear.
-2.25* at the front with some shimmng of the upper control arm.
The tires wore evenly across the tread with this setup and handled very well.
No instructions but it's not rocket surgery.
$75 shipped and I'll throw in some alignment shims for the front.
These gave me -1.5* camber at the rear.
-2.25* at the front with some shimmng of the upper control arm.
The tires wore evenly across the tread with this setup and handled very well.
No instructions but it's not rocket surgery.
$75 shipped and I'll throw in some alignment shims for the front.
Last edited by Gatorac; 07-25-2006 at 10:52 PM.
#4
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,078
Received 8,918 Likes
on
5,327 Posts
Originally Posted by Gatorac
These gave me -1.5* camber at the rear.
-2.25* at the front with some shimmng of the upper control arm.
The tires wore evenly across the tread with this setup and handled very well.
No instructions but it's not rocket surgery.
$75 shipped and I'll throw in some alignment shims for the front.
-2.25* at the front with some shimmng of the upper control arm.
The tires wore evenly across the tread with this setup and handled very well.
No instructions but it's not rocket surgery.
$75 shipped and I'll throw in some alignment shims for the front.
Bill