C5 Poly Control Arm Bushings For Sale
#1
Racer
Thread Starter
C5 Poly Control Arm Bushings For Sale
I have a new set of VETTE BRAKES Polyurethane Control Arm Bushings for a C5 that I am not going to use. They list for $249.95 in the 2006 Vette Brakes catalog. I will sell them for $225 and ship free to the lower 48 states. If you need pictures, send me a message with your email address. Thanks
#2
How are these installed? On the C4s we used to burn out the original one.
I am assuming these are for the lowers, since they are the ones that fail. Shoot me a foto. I think I'll need these.
colourquest@verizon.net
I am assuming these are for the lowers, since they are the ones that fail. Shoot me a foto. I think I'll need these.
colourquest@verizon.net
Last edited by TEXAST1; 10-06-2006 at 08:12 PM.
#3
Racer
Thread Starter
Burn them out? I would think you could press them out as well. I just dont know for sure, I did sent a picture to your email. Thanks.
#5
Racer
Thread Starter
Vette Brakes recomends drilling 3/8th holes in the rubber in several places to loosen the old bushing untill it can be removed. Lube the new Poly bruhings with a good grease and press in. If you dont have a press it can be done with a large clamp.
#6
Racer
Thread Starter
Originally Posted by BLACK SHARK
I have a new set of VETTE BRAKES Polyurethane Control Arm Bushings for a C5 that I am not going to use. They list for $249.95 in the 2006 Vette Brakes catalog. I will sell them for $225 and ship free to the lower 48 states. If you need pictures, send me a message with your email address. Thanks