07 Z06 Track Set-Up Help?
#1
07 Z06 Track Set-Up Help?
I would like to help make my friends 07 Z into a track killer.
Looking for a shop than can do a full track set-up, DA shocks, springs, bushings, heat sheild, aero improvements, brakes WC Calipers and 2 piece rotors plus an R tire & wheel package.
For the engine, is there anything of concern to address for longevity, not looking for major HP just want it to last.
The car is in Florida and is going to be shipped to Toronto, this work will be done before bringing the car home.....so I would like the shop to be along this route.
Work to be done ASAP thanks,
Looking for a shop than can do a full track set-up, DA shocks, springs, bushings, heat sheild, aero improvements, brakes WC Calipers and 2 piece rotors plus an R tire & wheel package.
For the engine, is there anything of concern to address for longevity, not looking for major HP just want it to last.
The car is in Florida and is going to be shipped to Toronto, this work will be done before bringing the car home.....so I would like the shop to be along this route.
Work to be done ASAP thanks,
#2
Pro
Member Since: Oct 2004
Location: Haymarket VA
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '07
I would like to help make my friends 07 Z into a track killer.
Looking for a shop than can do a full track set-up, DA shocks, springs, bushings, heat sheild, aero improvements, brakes WC Calipers and 2 piece rotors plus an R tire & wheel package.
For the engine, is there anything of concern to address for longevity, not looking for major HP just want it to last.
The car is in Florida and is going to be shipped to Toronto, this work will be done before bringing the car home.....so I would like the shop to be along this route.
Work to be done ASAP thanks,
Looking for a shop than can do a full track set-up, DA shocks, springs, bushings, heat sheild, aero improvements, brakes WC Calipers and 2 piece rotors plus an R tire & wheel package.
For the engine, is there anything of concern to address for longevity, not looking for major HP just want it to last.
The car is in Florida and is going to be shipped to Toronto, this work will be done before bringing the car home.....so I would like the shop to be along this route.
Work to be done ASAP thanks,
#4
Le Mans Master<br><img src="/forums/images/ranks/5k-6k.gif" border="0">
Member Since: May 2007
Posts: 5,399
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08-'09
#5
I would recommend Dannny Popp---
He works at McClusky Chevrolet in Cinncinati---he set up my C5Z06--
and he also did Rod McGeorge's C6Z06---
He also frequents this board "RAFTRACER"
He works at McClusky Chevrolet in Cinncinati---he set up my C5Z06--
and he also did Rod McGeorge's C6Z06---
He also frequents this board "RAFTRACER"