Penske/Mallett valving question
#1
Racer
Thread Starter
Member Since: Aug 2006
Location: Simpsonville SC
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Penske/Mallett valving question
I have a set of Penske/Mallett shocks. Can anyone tell me what valving they have in them ? The front has a B/D code and the rear has a B/B+ code. Thanks
#4
Safety Car
Nope. Penske uses the letters to identify their valving.
http://www.pegasusautoracing.com/pro...p?Product=8016
http://www.pegasusautoracing.com/pro...p?Product=8016
Last edited by gkmccready; 10-07-2007 at 05:17 PM. Reason: Added URL
#5
Le Mans Master
Member Since: Feb 2000
Location: Bedford NH
Posts: 5,708
Likes: 0
Received 1 Like
on
1 Post
Cruise-In II Veteran
Those are Penske speak for the valve stacks. See page 18 of the Penske manual downloadable here:
http://hardbarusa.com/PenskeManual.pdf
You also need to know what the bleed is because that determines when the stacks open and close.
http://hardbarusa.com/PenskeManual.pdf
You also need to know what the bleed is because that determines when the stacks open and close.
#6
Racer
Thread Starter
Member Since: Aug 2006
Location: Simpsonville SC
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, these are non ajustable 7400 or 7500 series. I think I need to have them revalved. I'd like to convert them to coilovers. Who can do that for me ?
#7
Le Mans Master
Member Since: Feb 2000
Location: Bedford NH
Posts: 5,708
Likes: 0
Received 1 Like
on
1 Post
Cruise-In II Veteran
We can do all that for you. We have a new Roherig shock dyno, and will include the graphs for all the shocks. In addition, we can provide you with our new dual rate Hyperco coil overs, or any other spring setup you desire.
Gary Hoffman
Hardbarusa.com
603-682-8073
Gary Hoffman
Hardbarusa.com
603-682-8073