Need part: Harness Sub Belt Mount
#1
Racer
Thread Starter
Member Since: Feb 2001
Location: Hermitage TN
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Need part: Harness Sub Belt Mount
I am installing new harness' in my Z. I need a bar that installs on the seat bolts and has three holes drilled into the bar for lap belt and/or sub belt. The bar is the width of the seat rails and is bent so the bolts that hold the belts is elevated about 1" from the floor. I have one of these bars but need three more. I have searched the internet and local racing parts houses but can't locate them. Any ideas out there?
#2
Melting Slicks
Dan, at vetteworks http://www.vetteworksonline.com/cata...1aa309f40d0ba4
or
Gary at Hardbar http://www.hardbarusa.com/hardbar/
JD
or
Gary at Hardbar http://www.hardbarusa.com/hardbar/
JD
#3
Tech Contributor
Member Since: Oct 1999
Location: Charlotte, NC (formerly Endicott, NY)
Posts: 40,088
Received 8,927 Likes
on
5,332 Posts
Dan, at vetteworks http://www.vetteworksonline.com/cata...1aa309f40d0ba4
or
Gary at Hardbar http://www.hardbarusa.com/hardbar/
JD
or
Gary at Hardbar http://www.hardbarusa.com/hardbar/
JD
Bill
#4
Melting Slicks
#6
Le Mans Master
Skip the 5-point deal unless you've got a proper racing seat with a hole in the bottom
#7
Instructor
Member Since: Apr 2006
Location: Santa Monica CA
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Vetteworks lap/sub bar
I've got an extra one, hardly used and will sell for $50 shipped. Used it 3 or 4 weekends on my 2007 Z06. It is a balck piece of heavy steel that bolts down between the back seat track bolts on a C5 or C6. The lap belts clip into eye bolts and the anti-sub staps feed through triangular clips w/ belt slots.
Best,
Matthew Rogers
mrogers@cbmlaw.com
213 833 4504
Best,
Matthew Rogers
mrogers@cbmlaw.com
213 833 4504